Smart Radiator Thermostat Compatibility Guide
6Pages

Smart Radiator Thermostat Compatibility Guide Find out if the Smart Radiator Thermostat works with your radiator valve V1.2 September 2020 Non-thermostatic radiator valves A non-thermostatic or manual valve is a simple on/off valve that works like a tap. It regulates hot water flow to the radiator and changes the room’s temperature only when it is manually turned on or off. If you unmount the valve head of a manual valve, you’ll find that there is no pin that can be pushed in and out. Unfortunately, tado° Smart Radiator Thermostats are not compatible with non-thermostatic radiator valves. To be able to use tado° on your radiator, consider getting your valve replaced with an M30 x 1.5 mm thermostatic radiator valve. How to find out if my radiator valve is thermostatic or manual? The pictures below show a few examples of common non-thermostatic radiator valves: Thermostatic radiator valves A thermostatic radiator valve senses the room temperature and automatically adjusts the hot water flow to the radiator to maintain a constant temperature in the room. The tado° Smart Radiator Thermostat works only with thermostatic radiator valves and it replaces your existing thermostatic valve head. Please note: tado° is not compatible with return temperature limiter valves (RTL valves), which are mostly used for underfloor heating. This is because tado°, in combination with an RTL valve, will not be able to limit the hot water temperature for underfloor heating. Please check the list below to find out if your thermostatic radiator valve is compatible with tado°, if an adapter is needed to install tado° on it and if we supply this adapter or not. Brand name Type of connection (Thread / Clamp) Thread: M30 x 1.5 mm

Brand name Model Supreme Type of connection (Thread / Clamp) Thread: M28 x 1.5 mm With adapter With adapter No adapter needed Danfoss / Honeywell Clamp: 23mm with notches With adapter Clamp: 34 mm with 4 notches With adapter Adapter name: RAV-02 Clamp: 25.5 mm with 4 notches With adapter Clamp: 32 mm with 2 notches With adapter Adapter Name: RE-DRTD EAN: 8594012221666 With adapter Emmeti Adapter name: Terrier AD3 (635111) With adapter

Brand name Fratelli - Pettinaroli Type of connection (Thread / Clamp) Clamp: inside thread M20 With adapter Clamp: inside thread M22 With adapter With adapter No adapter needed Herz, Honeywell With adapter Honeywell / Braukmann Thread: M30 x 1.5 mm No adapter needed With adapter

Brand name Type of connection (Thread / Clamp) Evosense Sprint Thread: M28 x 1.5 mm & Public / MTW-AD / DTW / VR10 Harmony, Eroso, Victory, Electrónica, Viking With adapter With adapter Thread: M28 x 1.0 mm With adapter Clamp: 30.5 mm With adapter Clamp: 25.5 mm with 4 notches With adapter Clamp: 34 mm with 4 notches With adapter Clamp: 23 mm with notches With adapter Thread: M28 x 1.5 mm With adapter Vindo TH / Uni series / Pinox H Thread: M30 x 1.5 mm No adapter needed

Brand name Type of connection (Thread / Clamp) Thread: M32 x 1.0 mm With adapter Is an adapter provided? Adapter name: 9700-36.700 EAN: 4024052562411 Yorkshire, Terrier (I) (II) (III) / Mistral (I) (II) / Belmont Pegler Yorkshire Conic / Bulldog Thread: M28 x 1.5 mm With adapter Thread: M26 x 1.5 mm With adapter Clamp: 22,6 mm With adapter Thread: M28 x 1.5 mm With adapter

Brand name Type of connection (Thread / Clamp) With adapter With adapter Thread: M28 x 1.5 mm With adapter TA Heimeier Vaillant Adapter Clamp: 30.5 mm With adapter Valf Sanayli With adapter If your valve is not on this list or if none of the given adapters fit your valve, consider getting your valve replaced with an M30 x 1.5 mm thermostatic radiator valve. Please note: While tado° works with a great range of thermostatic radiator valves, there may be a few that tado° currently does not support. In some cases, the compatibility depends on your complete heati