GOLD & COMPACT Energy-efficient, compact and flexible air handling units

Air handling units with unbeatable advantages Saves space Swegon’s air handling units have compact dimensions and what’s more sharp duct bends can be connected directly to the air handling unit without pressure losses. This saves you space in the fan room. Optimum operating economy Energy-saving fans, efficient heat recovery and full control of temperatures, airflows and operating times provide optimum operating economy. Economical control functions A large number of functions, including communication, are integrated into the control system and are ready to be activated via a hand-held micro...

Revolutionary control system in the new GOLD version E The user interface is available in a large number of languages, selected on the handheld terminal. Groundbreaking step User friendly multi-touch screen With the new GOLD version E, Swegon takes a groundbreaking step in the further development of the air handling unit, which for some time has been seen as standard in the industry. The new handheld terminal, IQnavigator, features a multi-touch screen and is very simple and easy-to-use. Commissioning and settings are performed with an intuitive user interface, and informative help texts. Set...

Exceptional energy efficiency Energy-efficient fans of international calibre! Swegon’s fans are of the new generation of energy-efficient fans. The motors are of EC type and have been developed on a new platform that offers the best energy efficiency on the market. Swegon’s EC motors can achieve a peak efficiency of more than 90%. This is more than 10 percentage units better than traditional AC motors with frequency inverters and the difference becomes greater the more the speed of rotation is regulated to decelerate. Every improvement in motor efficiency can be directly translated into a reduction...

Technical Description General Points - GOLD The GOLD RX/PX/CX/LP one-piece units are complete air handling units with direct-driven supply air and extract air fans, supply air and extract air filters and heat exchanger. The heat exchanger is either a rotary heat exchanger (RX/LP), plate heat exchanger (PX) or coil heat exchangers (CX). The GOLD SD single-direction units are supply air/extract air handling units with one direct-driven supply air or extract air fan. Optional filters are available for all sizes. Coil heat exchangers and unmounted pipework packages can be selected for the size 12-120...

Duct accessories, GOLD Duct accessories are available for a complete installation, such asdampers, air heaters for pre- and post- heating, air coolers, prefilters and sound attenuators. As alternatives, most of the duct accessories are provided for connection with full cross sectional area, i.e. Full face. This reduces pressure losses, which saves electric power supplied to the fans. The accessories for Full face are integrated into an insulated casing, which reduces the installation costs and facilitates installation outdoors. Examples of insulated duct accessories Examples of uninsulated duct...

DX cooling units Cooling unit COOL DX/COOL DX Top COOL DX Top The COOL DX/COOL DX Top are internally fully wired, charged with refrigerant and the unit is trial run. The cooling unit can be docked to the GOLD or it can be installed as a stand-alone unit. Only one electric power supply and one communication cable (with quick-fit connector) between the COOL DX/COOL DX Top and the GOLD are required. All control is performed via GOLD. CELEST+ in version LE/HP is a highly efficient chiller for small installations and is available in six sizes up to 30 kW cooling capacity. It is possible to connect...

Overview – Airflows, GOLD GOLD RX All the sizing data specified in this brochure are meant for use as an overview. Exact sizing can be carried out in the web-based ProUnit air handling unit selection software. Contact your nearest Swegon representative for data calculations or use the program yourself at www.swegon.com. Dimensions specified in this brochure Width Height (including junction hood and base beams) Supplied with or without end wall panel The air handling unit can be ordered without end connection panel for the required direction of airflow and with insulated duct accessories that...

GOLD RX sizes 04/05, 07/08 Duct connection options A: Specify left-hand or right-hand version when placing orders. If the air handling unit is supplied with all the end connection panels, the version can be changed at the building site via the handheld terminal. B: Specify with or without end wall panel for each airflow direction when placing orders. Right-hand version C: The air handling unit can be installed upended. Bottom beam/Base frame/Base If the air handling unit is installed horizontally, it must be mounted on a bottom beam (option), stand (accessory) or some other form of base support,...

GOLD RX, sizes 11/12 Duct connection options A: Specify left-hand or right-hand version when placing orders. If the air handling unit is supplied with all the end connection panels, the version can be changed at the building site via the handheld terminal. Right-hand version B: Specify with or without end wall panel for each airflow direction when placing orders. C: The arrangement of the functional sections can be vertically reversed. Specify this by selecting fan arrangement 1 or 2 when placing orders. Left-hand version GOLD RX size The longest section when sectionalizing mm 655 Power connection...

Duct connection options A: Specify left-hand or right-hand version when placing orders. If the air handling unit is supplied with all the end connection panels, the version can be changed at the building site via the handheld terminal. B: Specify with or without end wall panel for each airflow direction when placing orders. Right-hand version C: The arrangement of the functional sections can be vertically reversed. Specify this by selecting fan arrangement 1 or 2 when placing orders. D: Specify upper fan outlet for upward air discharge when placing orders (not for outdoor units). E: Specify air...