Access Control Power Supply EAP-5D5Q 5.0A at 12VDC and 4.5A at 24VDC Features: Field-selectable 12VDC or 24VDC outputs. Five individually fused power outputs. Each output operates both in fail-safe and fail-secure modes. Filtered and electronically regulated outputs. AC input and DC output LED indicators. Built-in back-up battery charger. Back-up battery is optional. Automatically switches to back-up battery if AC power fails. Adjustable voltage range to compensate for voltage drop. Emergency trigger inputs. AC power failure supervision relay. Low battery and battery presence supervision relay. Auxiliary relay output. Battery leads included. Removable steel cover for easy access. Dimensions: 12.15”x12.25”x3.6” (31.6x30.9x91 mm) Connections: Main Board AC input Terminal Block Dip switch for 12 or 24 VDC output selection Auxiliary Output Relay DC Power Fail Supervision Relay DC voltage input signal from Access Control Station or emergency switch Input Voltage Output Voltage NO or NC input from Access Control Station or emergency switch Fuse Type Five Fail-Safe & Fail-Secure Fused Outputs at 12 or 24VDC output AC fail Supervision Relay Output AC Fail Relay Contact Rating Back-up battery Battery Fail / Presence Relay Contact Rating 3A@24VDC Dry Relay Output 3A@24VDC Dry Relay Output Auxiliary Output Relay Contact Rating Power Distribution Module (PDM) DC Fail Relay Contact Rating Bat. fail & low battery Supervision Relay Output Supply Current Copyright © 2008 Superior Electronics Corporation. All rights reserved. The SECO-LARM policy is one of continual development. For that reason, SECO-LARM reserves the right to change prices and specifications without notice. SECO-LARM is not responsible for misprints. Superior Electronics Corporation No.10, Lane 31, Chongde St., Sinyi District, Taipei City 110, Taiwan E-mail: [email protected] Website: www.enfo