Swimming Pool Dehumidifier - SP1000/1000C Features ◆ SP1000C comes with specially coated coils to guard against corrosion from condensation and from salt/chlorinated water ◆ Processor Controlled automatic hot-gas defrost system, allows effective operation down to 1℃ ◆ Loss Power Protection with Auto Restart. ◆ Pressure protection system switches unit off (and later back on again) when the ambient temperature becomes too low or too high Application & Functioning Technical Data Condensation principle (heat-pump technology with energy recovery) Hard Plastic, Splash & Rust resistant. Area Handling Protection Class Indoor-pools with water surface upto approximate 80㎡ (60~80㎡) *** Heated rooms upto 1100CBM; Unheated rooms upto 900CBM. Dehumidifying Performance Indoor pools, sauna rooms, museums, art galleries, storage areas, Power Consumption / Ampere archives, labs, greenhouses, etc. Dimensions & Installation Operation Range Wall mount / Floor mount / Mobile Put the plug into power socket. Turn on the unit and set the required Noise Level humidity level Condensate Outlet Defrost Type Drain hose can be fast connected. Power Supplier Air inlet at the front, air outlet from the top Touchpad Control Panel With Timer & Humidistat Control Remote Control Included Accessories Nylon Filter Water Feed Gravity Feed Bottom Wall Mounted Brackets & Plates(2) with Screws(8) Floor Mounted Brackets (4) 3 meters with plug Compressor Type / Refrigerant Water Drain Hose (1) Condensation Hose Connector (1) 12 months from purchase External Automatic Condensation Pump (Optional) Optional Accessories External Automatic Condensation Pump (1) ※※ Depending on water and room temperature Specifications are subject to change without notice. Some values are approximate. Suntec Industries (H.K.) Ltd. URL: www.suntecind.com Email