Stalotec

Stalotec

Stalotec

Product catalog summary
Technical Specifications Summary
Water Absorption: The average water absorption is ≤ 3% as per EN ISO 10545-3.
Bending Strength: The average bending strength is ø 28 N/mm² according to EN ISO 10545-4.
Scratch Hardness: The minimum individual value on the Mohs scale is between 6 and 7, as per EN 15771.
Abrasion Resistance: For unglazed tiles, the volume loss is ≤ 275 mm³, following EN ISO 10545-6.
Thermal Expansion: The coefficient of thermal expansion from 20°C to 100°C is < 80x10-7K-1, according to EN ISO 10545-8.
Thermal Shock Resistance: The tiles meet the requirements of EN ISO 10545-9.
Frost Resistance: The tiles fulfill the standards of EN ISO 10545-12.
Chemical Resistance: The tiles are resistant to chemicals except hydrofluoric acid and its compounds, as per EN ISO 10545-13.
Slip Resistance: For barefoot areas, the tiles are classified in Group B (DIN EN 16165 Annex A). For industrial areas with increased slip risk, they are classified in Group R 11 (DIN EN 16165 Annex B).
Product Description: Extruded floor tiles, size 12.5 x 25 cm, available in beige and red colors, with various order numbers.
Manufacturer: Ströher GmbH, Dillenburg, Germany.
See more

Catalog excerpts

Stalotec-1

TECHNISCHE WERTE TECHNICAL SPECIFICATIONS ТЕХНИЧЕСКИЕ ДАННЫЕ SCHEDA TECNICA STALOTEC® DIN EN 14411 Bezeichnung/Description/ Обозначение артикула/Descrizione Format/Size/Обозначение артикула/ Formato Artikelnummer/Order number/ номер артикула/Articolo Extrudierte Bodenfliese Extrudierte Bodenfliese Extrudierte Bodenfliese Extrudierte Bodenfliese 120 beige, 215 rot 120 beige, 215 rot 120 beige, 215 rot 120 beige, 215 rot Wasseraufnahme (Mittelwert) Water absorption (Average value) Водопоглощение (среднее значение) Assorbenze acqua (Valore medio) (EN ISO 10545-3): Biegefestigkeit (Mittelwert) Bending strength (Average value) Прочность на изгиб (среднее значение) Resistenza alla flessione (Valore medio) (EN ISO 10545-4): Ritzhärte nach Mohs (kleinster Einzelwert) Scratch hardness of surface (Mohs scale) (minimum individual value) Твердость по шкале Мооса (меньшее значение) Durezza selerometrica sec. Mohs (valore singolo minore) (EN 15771): Verschleißwiderstand der Oberfläche für unglasierte Platten (Volumenverlust) Resistance of surface abrasion for unglazed tiles (Volume loss) Износостойкость поверхности глазурованных плиток (неглазурованная) Resistenza all´usura superficiale per piastrelle grezze (perdita di volume) (EN ISO 10545-6): Thermischer LAK von Raumtemperatur (20° C) bis 100° C Coefficient of thermal expansion from room temperatur (20° C) to 100° C Коэффициент термического расширения от комнатной температуры (20° C) до 100° C Coefficiente di dilatazione in lunghezza a temperatura ambiente (20° C) fino a 100°C (EN ISO 10545-8): Temperaturwechselbeständigkeit Thermal shock resistance Термостойкость Resistenza agli sbalzi di temperatura (EN ISO 10545-9):

 Open the catalog to page 1
Stalotec-2

TECHNISCHE WERTE TECHNICAL SPECIFICATIONS ТЕХНИЧЕСКИЕ ДАННЫЕ SCHEDA TECNICA Chemische Beständigkeit – außer gegen Flußsäure und ihre Verbindungen – für Fliesen und Platten Chemical resistance – except to hydrofluoric acid and its compounds – of tiles Химическая устойчивость — кроме плавиковой кислоты (фтористоводородной) и ее соединений — для глазурованной и неглазурованной плитки Resistenza agli agenti chimici – ad eccezione dell´ acido fluoridrico e del suoi composti – per piastrelle (EN ISO 10545-13): erfüllt/is fulfilled/Выполнено/conforme Bewertungsgruppe für rutschhemmende Bodenbeläge im...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.