1200x1200x920mm high Grenadier tree planters in natural iroko hardwood

• Established in 1986 • Designers and manufacturers of street furniture products • ISO 9001: 2000 registered company • FSC certified company • Market leaders in the supply of planters • Member of the Timber Research and Development Association Material Planters can be manufactured in FSC treated softwood, Iroko hardwood, galvanised mild steel, stainless steel, natural stone, high density polyethylene and re-cycled plastics. Sizes Planters can be manufactured and supplied fully assembled, from 500x500mm up to 2800x2800mm. Larger planters can be supplied in sections to bolt together on site. The...

Standard planters Castleton Planter Gallery Mesh Planter Vertical 95x45mm slats on a mild steel frame with exposed bolt heads and tubular steel top capping. 60x60mm galvanised angle top and bottom frames with 60x60mm angle corners and galvanised mild steel sheet and mesh infill panels. Also available with stainless steel top. Ashford Planter Selby Planter 60x60mm square section corner posts, with vertical flats, decorative top rings and spheres on the post tops. An all metal planter with vertical flats and galvanised mild steel sheet panels behind flats. Also available as circular planters. Also...

Premier planters Meridian Planter Bradgate Planter A vertical slatted all metal planter with decorative fluted top. Vertical flats with rolled rings and galvanised sheet panels. 125x35mm horizontal, lapped boards, bolted to a steel frame using recessed hex head exposed bolts. Galvanised steel plinth. Also available as square and rectangular planters. Snowdon Planter Granite infill panels held inside a steel frame with adjustable feet, forklift channels and antiskating discs. Kensington Planter Vertical and horizontal board planter with large top capping and metal feature corner straps. Metal...

Bespoke Planters Main picture Elliptical Castleton planter in natural iroko hardwood Right top to bottom Bespoke planter in natural iroko hardwood and stainless steel with bowed sides Iroko hardwood & bronze planters designed by Leeds City Council Special design based on the Ashford planter with elliptical rings and arched flats, in green slate and black powder coated steel Swithland crescent planter with integral bench Above left Elliptical Castleton planter with additional stainless steel ring to the base of the planter

General specification Materials and construction All furniture products are robustly constructed using only quality, durable materials. Hardwood products are constructed from iroko hardwood. Softwood products are constructed using European redwood that is treated for a desired service life of 30 years minimum. All mild steel fabricated components will be hot dip galvanised after fabrication to BSEN ISO 1461. All fixings will be bright zinc plated. Planters will be fitted with a geotextile filter fabric lining, which allows the water to drain through the planter while retaining the fill material....