Gallery Planters

Product catalog summary

Overview: Street Design offers a range of Gallery Planters as part of their outdoor furniture collection. These planters are constructed from galvanized mild steel with optional bolt-on infill panels made from either galvanized steel or high-density polyethylene (HDPE).

Specifications: The standard size for the Gallery Planters is 1250 x 635 x 715mm, with variations available. They are made from galvanized sheet/mesh panels and can be delivered fully assembled or as a flat-pack for areas with restricted access. The flat-pack version consists of 11 parts with fixings.

Materials and Construction: The planters are robustly constructed using durable materials. Mild steel components are hot dip galvanized to BS EN ISO 1461 standards, and all fixings are bright zinc plated. The planters include a geotextile filter fabric lining for drainage. HDPE panels are available in 12.5 or 19mm thickness, are UV stable, and resistant to rot, delamination, splintering, cracking, stains, graffiti, moisture, and chemicals. They are also recyclable and non-toxic.

Options: Planters can be fitted with a self-watering system, tree anchors, and height adjusters. The steel components can be powder-coated in any RAL color, and HDPE panels are available in standard and special colors. Personalization options include adding names, logos, and crests.

Standard and Special Colors: HDPE standard colors include red, yellow, blue, green, orange, violet, and black. Special colors include beige, brown, white, and grey. Galvanized steel sheets are available in standard finishes, with options for powder coating.

Additional Information: Street Design offers a wide range of planters and external street furniture products, with standard products available on their website. They also provide bespoke designs to meet specific project requirements.

Catalog excerpts

Gallery Planters 1250 x 635 x 715mm high in galvanised sheet

Open the catalog to page 1

Gallery Planters As part of our comprehensive outdoor furniture range, Street Design offers you the opportunity to specify from a range of planters constructed from galvanised mild steel with bolt-on infill panels manufactured from either galvanised steel or self-coloured, high density polyethylene. Flat pack Gallery planter consists of 11 parts with fixings. Flat pack Gallery planter ready for packaging and distribution. The Gallery planter is a low maintenance product. As standard the galvanised steel and polyethylene side panels have no applied finish and therefore need no repairs or touch-up....

Open the catalog to page 2

1250 x 1250 x 1370mm high Tree planter Standard Colours - HDPE (High density polyethylene) Standard Finishes - Pre-galvanised steel sheet Galvanised steel sheet Galvanised steel Black sheet Galvanised mesh Galvanised mesh Special Colours - HDPE (High density polyethylene)

Open the catalog to page 3

Materials and construction All furniture products are robustly constructed using only quality, durable materials. All mild steel fabricated components will be hot dip galvanised after fabrication, to BS EN ISO 1461. All fixings will be bright zinc plated. Planters will be fitted with a geotextile filter fabric lining, which allows the water to drain through the planter while retaining the fill material. The high density polyethylene is available either 12.5 or 19mm thick. It is UV stable and will not rot, de-laminate, splinter or crack. It is stain and graffiti resistant, moisture and chemical...

Open the catalog to page 4

Gallery Planters

Gallery Planters

Catalog excerpts

All Street Design catalogs and technical brochures