Catalogs >
Strand Lighting >
Vision.Net 4-Port Digital I/O Module

Vision.Net 4-Port Digital I/O Module
4Pages

Catalog excerpts

Vision.Net 4-Port Digital I/O Module - 1

Vision.Net 4-Port Digital I/O Module The Strand Vision.Net 4-Port Digital I/O Module is digital input/output (I/O) control device. The Digital I/O Module offers up to four discrete digital control inputs, four open collector outputs, and four dry contact relay closures. This device accepts singlecommand 3rd party signals originating from occupancy sensors, IR room combine sensors, vacancy sensors, door and window sensors, access card readers, alarm systems, AV control systems, and building management systems to trigger commands in Vision.Net. The 4-port I/O will also act as an intermediary device accepting 3rd party digital input signals and mirroring to the dry contact outputs to signal other downstream 3rd party contact closure devices. As well, the 4-port I/O can send digital output signals from Vision.Net to provide status updates or trigger actions within third-party systems. You can even send signals to environmental air systems, window shades, projection screens, A/C dampeners and many other devices. This UL listed and plenum rated device can be DIN rail or surface mounted anywhere in the system, simplifying design and commissioning.

Open the catalog to page 1

Vision.Net 4-Port Digital I/O Module - 2

Vision.Net 4-Port Digital I/O Module FEATURES AND BENEFITS • 4 Digital Inputs – connect to 3rd party sensors and external systems, including AV control systems and building management systems, to trigger Vision.Net • 4 Digital Outputs – use Vision.Net to send system status updates or trigger responses in external systems, such as AV control systems and building management systems • 4 dry contact relay closures – control window shades, projection screens, A/C dampeners, or other environmental systems • Surface or 35mm DIN Rail mounting – easy to install either directly onto a surface or...

Open the catalog to page 2

Vision.Net 4-Port Digital I/O Module - 3

Vision.Net 4-Port Digital I/O Module POWER Input voltage Maximum rated input current Output voltage Maximum rated output current Recommended I/O cable type Recommended digital I/O wire type Relay outputs Recommended relay outputs wire type PHYSICALS Color Fine, powder-coated Cold rolled steel, 18 gauge Device w/DIN-rail mount, connectors Device w/surface mount, connectors Packed WEIGHT Device w/DIN-rail mount, connectors Device w/surface mount, connectors Packed ENVIRONMENT Operating temperature Maximum surface temperature, steady state, at 25°C ambient Total calculated heat dissipation...

Open the catalog to page 3

Vision.Net 4-Port Digital I/O Module - 4

Vision.Net 4-Port Digital I/O Module INSTALLATION Mounting DIN Rail, Surface Mount Mounting Holes, Surface Mount Bracket Recommended Mounting Hardware, Surface Mount #6 Rounded Head Fastener (not included) DIN Modules (Standard Unit) APPROBATIONS Approvals/Listings Conformity INCLUDED ITEMS Quick Start Guide Surface Mount Bracket 1x 9-position screw-down plug-in connector 2x 5-position screw-down plug-in connector 4x 3-position screw-down plug-in connector PRODUCT NAME Vision.Net 4-Port Digital I/O Module ©2021 Signify Holding. All rights reserved. All trademarks are owned by Signify...

Open the catalog to page 4