PLPROFILE1 LED Luminaire
4Pages

PLPROFILE1 LED Luminaire The PLPROFILE1 LED luminaire is a variable beam profile with precise beam control and pattern projection from a high output beam. An innovative combination of LED source technology and precision optical design, the PLPROFILE1 luminaire delivers Philips Selecon’s industry benchmark projection quality in a compact, robust fixture. A key benefit of the PLPROFILE1 luminaire is that it is no longer necessary to change lamps or color filter. Combining the superior control and light quality of a Philips Selecon Profile with seamless fading between colors allows designers a new level of creativity. Less power consumption and no dimmer circuits makes the PLPROFILE1 luminaire the obvious choice for pattern projection and stage washes. Delivers the performance of a 500 watt profile fixture with a maximum power consumption of 150 watts Constant color balance down to very low light levels irrespective of intensity setting Available in 18 to 34 or 24 to 44 degree beam angles Interchangeable lens tray between medium and wide versions DMX512 Input/Output with 8 or 16-bit resolution or a simple 3-channel control Slot provided for iris, M-size pattern holder, or third party effect accessory On-board LCD menu for ease of luminaire set up and addressing Infinite color choice from the RGBW engine and supporting color temperatures from 2700K to 5600K in white No ultra-violet (wavelengths of less than 400nm) – for UVA, B or C or the Infrared spectrum (wavelengths of more than 775nm) Luminaire color: black Electronic universal power supply 100-240VAC PowerCon In and Through connectors Electronic power supply; ETL / cETL approved and CE marked Homogenized fully mixed color output light, no multiple color shadows Ten’s of thousands of hours of life expectancy Quick selection of Warm White, Cool White, and Daylight User defined on board presets states available to record your color composition Color presets simplifies matching existing light sources SPECIFICATION SUBMITTAL CONSULTANT: PROJECT NAME: MODEL NUMBER | QUANTITY: PROJECT NUMBER:

Advanced Control The PLPROFILE1 LED luminaire has an on-board LCD menu system for luminaire setup, control, and addressing. The menu system is extremely user-friendly and offers all configuration options with a few button presses. PLPROFILE1 Luminaire Advanced Control 1 Console Control All PLPROFILE1 luminaires support DMX512 control with a choice of 8 or 16 bit control resolution or simple 3-channel control. With the increased development of LED luminaires like PL1 and PLPROFILE1 with 4 or more colors additional control is needed for intuitive operation. All Strand Lighting Palette family...

Technical Specifications Electrical Specifications Mechanical Specifications 1 Each, True RGBW 120W LED chip Operating Voltages: Machined aluminum, sheet metal, and molded engineering grade plastic components Current Draw: 1.3 Amps (115V) / 0.65 Amps (230V) Maximum load with all LEDs at full RGBW Power Consumption: Ambient Temperature: 15 Channels (16-Bit Mode) 9 Channels (8-Bit Mode) 3 Channels (3-Channel Mode) Optical Specifications Output: > 2,000 lumens (white light) Beam Angle: 18-34 Degrees or 24-44 Degrees (depends on lens option purchased) Standards Compliance: ETL/cETL Listed and...

Infinite color choices from the RGBW engine and supporting color temperatures from 2700K to 5600K in white. Accessories - AC Power Input Cables PLZS1-1834-03 PLPROFILE1 LED Luminaire, 18-34 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable* PLZS1-2444-03 PLPROFILE1 LED Luminaire, 24-44 Degree Zoomspot, Black, with SC C-Clamp, Safety Cable, and AC Input Cable* *Specify AC input connector at time of ordering (GR - Edison / GP - Grounded Stagepin / GTL - Twistlock). PLPROFILE1 Luminaire AC Power Input Cable (39 inches / 1 meter), Powercon without AC connector (bare end)...