Environ 3 Wallbox Dimming System
6Pages

Strand Architectural Controls Architectural Lighting Control System Environ3 architectural lighting control system is a revolutionary networked system of line voltage master keypads, wallbox dimmers, and infrared remotes that provide flexible multi-scene dimming capability at a remarkably affordable cost. Environ3 has been designed and engineered to be easy to install, easy to program, and easy to operate. By utilizing industry standard three-conductor wiring, the system is easy to install. Simply use the “purple wire” (line voltage communication) to connect the master control stations with the dimmers and Environ3 is ready to provide an endless array of lighting scenes. Environ3 Master Keypad and Three Dimmers Shown in a Four-Gang Configuration Up to 12 presets & ON and OFF – Environ3 accepts up to 12 different fade rates, ranging from 1.5 seconds to 1 hour all fade rates are user-programmable by preset • Two-way communication - an Environ3 system knows if it has been activated from either the master keypad or an individual dimmer, so that status is known at all times • Color options - Environ3 dimmers and keypads are available in white, ivory, almond, gray, and black • Up to thirty devices (dimmers, master keypads) can be incorporated into a single Environ3 network • All dimmers can be raised or lowered simultaneously at any master keypad • Environ3 A/V master keypads allows the system to be connected to a Vision.net contact closure interface to make it part of a building-wide architectural control system • cULus listed • User-friendly control - Environ3 master keypads feature illuminated push-buttons, each labeled with its designated preset or custom engraving • Never-fail memory (no batteries required) • Environ3 dimmers control incandescent, magnetic lowvoltage, neon, cold cathode, electronic low-voltage and fluorescent loads SPECIFICATION SUBMITTAL CONSULTANT: PROJECT NAME: MODEL NUMBER | QUANTITY: PROJECT NUMBER:

Architectural Lighting Control System Strand Architectural Controls Environ3 Control System Each Environ3 four-preset (four + ON and OFF) master control station has an integral infrared receiver that can be used in conjunction with an optional hand-held infrared transmitter. Many of the Environ3 five and eight-preset master control station models are available with A/V inputs which allow any device generating a 50 millisecond dry contact closure to activate any of the preset scenes. These devices include: • Third party audio/visual equipment • External time clocks The Environ3 dimmers and...

Strand Architectural Controls Architectural Lighting Control System Environ3 Power Extenders Environ3 dimming amplifiers are solid-state units intended to control a separate lighting circuit regardless of phase. It provides a smooth dimming range using Environ3 controls. Environ 3 Power Extender (1 x 10 amp fluorescent HDF dimming amplifier) Environ 3 Power Extender (2 x 2000W incandescent dimming amplifier) Environ3 Sample Riser Hall Lights (500W) (Master control stations mounted remotely) (Color Code) Y Typical layout using high-wattage dimmer with master control stations

Strand Architectural Controls Architectural Lighting Control System Ordering Information Cat No. Description Environ3 Master Control Stations 61204 61204H 61200 61202 Environ3 pushbutton station, 2 presets, strap, 1-gang, 120VAC Environ3 pushbutton station, 2 presets, heatsink (S), 1-gang, 120VAC Environ3 pushbutton station, 4 presets & ON and OFF, raise/lower, IR rec, strap, 1-gang, 120VAC Environ3 pushbutton station, 4 presets & ON and OFF, raise/lower, IR rec, A/V In, strap, 1-gang, 120VAC Environ3 pushbutton station, 4 presets & ON and OFF, raise/lower, IR rec, heatsink (S), 1-gang,...

Strand Architectural Controls Architectural Lighting Control System Environ3 electronic low-voltage heatsink (S) dimmer 500VA, 1-gang, 120VAC Environ3 incandescent/inductive heatsink (S) dimmer 600VA, 1-gang, 120VAC Environ3 incandescent/inductive heatsink (S) dimmer 1000VA, 1-gang, 120VAC Environ3 incandescent/inductive heatsink (L) dimmer 1500VA, 2-gang, 120VAC Environ3 incandescent/inductive heatsink (L) dimmer 2000VA, 2-gang, 120VAC Environ3 non-dim heatsink (S) switch, 1000VA, 1-gang, 120VAC Environ3 non-dim heatsink (L) switch, 2000VA, 2-gang, 120VAC Environ3 PowerSpec® HDF...

Strand Architectural Controls Architectural Lighting Control System Ordering Information Cat No. Description Environ3 Power Extenders/ Relay Modules / Cabinets Environ3 Power Extenders / Dimming Amplifiers Environ3 power extender 1 X 1000W electronic lowvoltage, wall mount, 120VAC Environ3 power extender, 2 X 1000W electronic lowvoltage, wall mount, 120VAC Environ3 power extender, 1 X 2400W incandescent, magnetic low-voltage, neon/cold cathode, wall mount, 120VAC Environ3 power extender, 2 X 2000W incandescent, magnetic low-voltage, neon/cold cathode, wall mount, 120VAC Environ3 power...