General Specifications
The suction excavator requires a chassis with a weight capacity of 26-32 tons and a wheelbase between 4550 - 4800 mm. It features a side tip hopper discharge with a height of 1556 mm and an angle of 70 degrees. The control system is a CANBus with diagnostic and radio remote control capabilities. The compressed air system operates at 9 m3/min and 7 bar.

Capacities
The hopper has a capacity of 8m3, and the fuel tank is customer-specific at 700 liters. The hydraulic system holds 200 liters, with a 275 HydraDrive option. The rear power arm pivots 180 degrees and has a range of 6000 mm. The suction hose diameter is 250 mm.

Suction System
The system includes a split-drive engine PTO and twin 900 mm diameter fans with variable operational speeds between 2400 RPM and 4000 RPM. It offers a maximum volume of 42,000 m3/h and a maximum vacuum of 40,000 Pa. The filter system consists of 40 cartridge filters with an automatic cleaning system.

Safety and Lighting
Safety features include three IP67 E-stop control circuits, rear door chevrons compliant with 'Chapter 8', and multiple LED lights for visibility and safety.

Construction and Materials
The hopper and lid are made from heavy-duty stainless steel, while fan enclosures are fabricated from mild steel and lined with soundproofing material. The equipment is painted in one solid color and includes dual stabilizer legs.

Optional Equipment
Options include camera monitoring systems, radar reversing safety sensors, perimeter lighting, a high-pressure washing system, gas detection, and a rotary head.

Compressed Air and Electrical System
The compressed air system includes a screw compressor and Jet Spade XT trenching tool. The electrical system features a CAN-bus iSS, STODD, and is 24 volts with IP67 rated connections.

Controls
The master control panel is located within the fan enclosure, providing information on excavator functions and fault detection. A secondary control panel is rear-mounted for operator convenience, with radio remote control located in the chassis cab.

Manufacturer Information
Stock Excavators LTD reserves the right to alter specifications without notice and offers a range of additional options upon request.