• Lift Type: Complies with BS EN81-41:2010 and Machinery Directive 2006/42/EC.
• Height Limit: Single floor with a maximum travel of 4500mm.
• Electricity: Operates on a 230V socket, similar to a standard household appliance.
• Load Capacity: Maximum of 170kg or 2 people.
• Drive System: Self-contained wire rope hoist located in the lift car roof space.
• Dimensions: Internal lift car height is 1940mm; external height is 2390mm; maximum lift car footprint is 860mm x 720mm.
• Control: Operated via control panel and remote controls.
• Lift Car Door: Options for 1100mm hinged half-height or full-height doors with LED light curtain protection.
• Illumination: Ambient lighting with LED strips.
• Lift Height: Minimum upper floor ceiling height of 2400mm for full height lift car; 2200mm for modified car.
• Speed: Up to 150mm/sec.
• Entrance Configuration: Single door.

• LED light curtain detects obstacles and stops the lift.
• Lift only moves when the door is fully closed.
• Sensors stop the lift if obstructions are detected.
• Built-in braking mechanism for safety.
• Battery backup for power failures.
• Load sensor to prevent exceeding weight limits.
• Secure locking mechanism for the lift car door.

• Small Footprint: Covers just 0.55m².
• Quiet Travel: Operated by a quiet electric motor.
• Fast Installation: Modular sections allow for installation in one day.
• Economical: Uses a standard 13-amp power socket.
• Unique Dual Rail System: Self-supporting structure with two parallel guides.
• Self-Contained Drive System: Located at the top of the lift, no external power packs needed.

• Standard lift, stairwell void/landing, garage, cupboard installation, and sloping or vaulted ceilings.

For more information, contact Stiltz Head Office at Building 5, Bay 1, First Avenue, Pensnett Estate, Kingswinford, DY6 7TE, or email [email protected].