PRODUCT SHEET TYPE Two-layers wood floor with surface protective finish. PRODUCTION Manufactured by Stile in Citta di Castello's plant, Umbria, Italy. WEAR LAYER Solid wood layer 2,5 mm thick FSC certified. on the lower and left edges. SUPPORT Phenolic multilayer Birch support with tangled fibres 7,8 mm thick JOINTS Each plank has a tongue on the top and right edges and a groove LENGTHS Planks has random lengths between 1.500 and 2.200 mm WIDTH Planks are 180 mm wide OVERALL THICKNESS Overall thickness is 10 mm OTHER FEATURES Bevels on long sides

Finish Naturale UV High resistance acrylic varnish dried with UV lamps. It combines the natural feeling of the wood conveyed by an oiled finish with the high performance granted by the varnish. This innovative finish, unlike standard varnishes, allows an easy maintenance and local repairing. Abrasion resistance 2.000 rpm Taber Test Tests done according UNI EN 14354:2005 regulation. Resistance class achieved: WR0 Reaction to fire class CFL-S1 Tests done according UNI EN ISO 9239-1:2010 regulation Manteinance FIRST CARE (suggested treatment) Removing dust: Bona Dusting Pad, mop or vacuum Removing...

The products must be unpacked at the time of installation which needs to take place when fixtures and plastering are completed, with room humidity from 40% to 60% and temperature not below 10 °C. The products must be laid onto dry sub-floors with humidity not above 2% (1,5% in case of heated floors). To grant a correct stability of the wood floor the room temperature must be between 10° and 25° and relative air humidity between 40% and 60%. With a too low humidity degree, some woods could have a natural stabilization and particularly suffer from detachments among the strips; on the contrary with...

Certificates Stile has a management system certified ISO 9001 Stile's products are in conformity with UNI EN 14342-2005 + A:2008 regulation for CE mark. Products with Varnished, Naturale UV, Traffic UV and Bona Raw finishes are included in the Cfl-s1 class for fire reaction with reference to the UNI EN 13501-1 2009 regulation. FSC® trademark identifies products made with wood from forests managed in a correct and responsible way in accordance with strict environmental, social and economic standards. All products that have been tested according to the methods described by the French Decree n °...

Warranty Stile Società Cooperativa (trading as Stile), with Headquarters in Trestina, Città di Castello (PG), in via dei Laghi n.18, 06012 Bivio Lugnano, VAT n.03517800540, tel. and fax +39 075 854 706, e-mail [email protected], certified business and member of the most important national and international associations in the field, is present on the market with an avant-garde and high quality product, thanks to its long experience as well as the use of modern and innovative technology. Stile pays maximum attention to every step of the production cycle, from the selection of raw materials to the...