1. Catalogs
  2. STIEBEL ELTRON
  3. Xpelair Catalogue

Xpelair Catalogue

Xpelair Catalogue
1 / 194 PagesView full catalog

Xpelair Catalogue

Product catalog summary
Overview: Xpelair is a leading manufacturer of ventilation solutions for domestic, commercial, and industrial applications, known for their ease of installation and reliability. Their products are distributed in over 80 countries and focus on safety, energy efficiency, and reducing carbon emissions.
CarbonLite Initiative: This initiative aims to reduce environmental impact through UltraDC and UltraEC technology, which lowers energy use and extends motor life. Products like XRA and XMV roof cowls are 100% recyclable and included in SAP calculations.
Domestic Ventilation: The document outlines ventilation requirements for domestic settings, emphasizing the prevention of moisture accumulation and indoor pollution. It provides specific ventilation rates for kitchens, utility rooms, bathrooms, and toilets, and discusses fan siting and the choice between axial and centrifugal fans.
Building Regulations: Part F1 mandates adequate ventilation to prevent moisture and pollutants. Guidelines are provided for new builds and refurbishments, detailing minimum ventilation requirements and air change rates for different rooms.
Wholehouse Ventilation: Xpelair offers solutions like the Xplus central extract range and Xcell MVHR systems, providing continuous ventilation and heat recovery with low running costs.
Bathroom Zoning: The document explains bathroom and shower room zoning according to BS7671:2001, detailing ingress protection ratings for electrical appliances to ensure safety.
Product Range: Xpelair offers a wide range of products, including axial and centrifugal fans, mixed flow fans, and systems for mechanical extract ventilation and heat recovery. The document includes a detailed product contents section with page references.
Condensation and Moisture Management: Moisture from hot water activities increases air humidity, leading to condensation. The document emphasizes the importance of effective ventilation systems to prevent condensation and odour problems.
Odour Management: Recommended solutions include extracting moisture and odours at the source, ideally positioning the extractor fan diagonally opposite the door or directly over the shower cubicle.
Regulations and Recommendations: Fans should have an IP rating of IPX4 or higher. Building Regulations require extract rates of 15 l/s for bathrooms and 6 l/s for toilets. Fans with built-in timers are recommended for rooms without windows.
Fan Types and Installation: Axial fans are suitable for wall or window fitting, while centrifugal fans are better for high-rise or exposed locations. Proper air replacement is crucial, achievable by maintaining a gap under the door or fitting an air replacement grille.
Product Specifications: The document provides detailed specifications for various Xpelair fan models, including voltage, positioning, extract rate, IP rating, and additional features like timers and humidity sensors.
Installation and Accessories: Installation options include flush or surface ceiling mounting, wall mounting, and window mounting. Accessories like wall vent kits, ducting kits, and condensation traps are available.
Conclusion: Effective ventilation is essential for managing moisture and odours in bathrooms and toilets. Selecting the right fan type and ensuring proper installation can significantly improve air quality and prevent condensation-related issues.
See more

Catalog excerpts

Xpelair Catalogue-76

Xpelalr Profile 150 Heat recovery duct Systems

 Open the catalog to page 76
Xpelair Catalogue-78

Xpelair SystemX Wholehouse heat recovery ducting kits

 Open the catalog to page 78
Xpelair Catalogue-80

Xpelair System X Accessories

 Open the catalog to page 80
Xpelair Catalogue-81

Xpelair SystemX Accessories (§>Xpelair

 Open the catalog to page 81
Xpelair Catalogue-82

Xpelalr EverDrl LongLIfe UltraDC DC positive pressure ventilation

 Open the catalog to page 82
Xpelair Catalogue-108

Xpelair Digitemp Comfort air condition!ng and heating

 Open the catalog to page 108
Xpelair Catalogue-110

Commercial wall heaters WHP30 Key features The Range Type: Wall Mounted Heaters The Xpelair WH range of wall heaters have stood the test of time to remain This has resulted in a range of tough, compact space heaters for the most Application: Commercial and market leaders. demanding environments. Industrial The WH range is perfect for use in The WH30 and WH60 models provide Control options: Integral/remote factories, warehouses, workshops, robust and rugged heating units, while canteens, and is also ideal for public the WHP30 provides comfortable, areas of shops, waiting rooms, office, reliable...

 Open the catalog to page 110
Xpelair Catalogue-111

®Xpelair Models Controllers Xpelair WH30 Ref. 98392AC 3kW industrial fan heater Օ Compact wall hung design Heavy duty steel casing with die cast aluminium guards Օ Spiral wound Nichrome wire element Metal wall bracket Օ Multi directional positioning -180o horizontal swivel and 45o vertical tilt then locked in position Wall bracket cover Օ Double safety feature of thermal cut out with auto reset and one shot fusible link Single phase product Օ For cool air circulation facility and thermostatic heating control use HC301 Controller (not supplied) Xpelair WH60 features over the WH30 Ref. 00147AC...

 Open the catalog to page 111
Xpelair Catalogue-112

Xpelair Pli Plinth heaters and Commercial wall heaters Key features Type: Unitary Heating Application: Shops, offices, kitchens Control options: Integral/remote Hole diameter: w440 x h95mm C The Range The PlinthHeat range can provide vital warmth to a cold floor and rapidly heat a room. The unit sits neatly in the plinth below a kitchen cupboard to provide an unobtrusive flow of warm air at floor level. Available with built-in control or for further convenience a thermostat and switch can be wall mounted elsewhere in the room. The units are available in three colours to match modern d)cor; ice...

 Open the catalog to page 112
Xpelair Catalogue-113

®Xpelair Models PlinthHeat with remote control* Ref. 91467AW Finish: Ice white PlinthHeat with remote control * Ref. 91468AB Finish: Conker brown PlinthHeat with remote control* Ref. 91313AW Finish: Stainless steel PlinthHeat with integral control Ref. 91465AW Finish: Ice white PlinthHeat with integral control Ref. 91466AB Finish: Conker brown PlinthHeat with integral control Ref. 91312AW Finish: Stainless steel Available in a choice of models with intթgral controls or with remote thermostatic controls 1kW and 2kW settings Օ Stitched 'black heat' element Maintenance free motor with sealed...

 Open the catalog to page 113
Xpelair Catalogue-114

Doorway hot air curtains Key features The Range The ScreenHeat range of fan powered doorway heaters provides the idal solution for draught exclusion on external doors. When mounted on the inside of an external door, the ScreenHeat cr驢tes a 'hot air curtain: to prevent cold draughts entering a building. In summer, the ScreenHeat can be switched to run only with the fan to form a barrier against incoming dust and provide a refreshing breeze. Suitable for a range of doorway applications in commercial premises such as shops, offices, workshops and stores, the ScreenHeat is designed for fast installation...

 Open the catalog to page 114
Xpelair Catalogue-115

<§)Xpelair Models ScreenHeat 3 Ref. 91469AW Doorway hot air curtain Օ Two heat outputs: 1.5kW, and 3kW High volume throughput 250m3/h Օ Smooth running, shaded pole motor, with greased for life bearings and safety thermal overload protection Heater element is of open coil design supported by ceramic insulators Օ The heater has a separate thermal cut-out Integral switching for ease of installation Օ Zinc coated steel, powder coated body Two mounting brackets which can be fitted prior to main case Օ Brackets allow the unit to be rotated from vertical to horizontal Tangential blower Օ White/grey...

 Open the catalog to page 115
Xpelair Catalogue-120

Polarising air filtration [NEW] XAC690UC XAC550/910CC XAC520/640W Key features Type: Air Cleaners Application: Pubs, clubs, restaurants, offices Control options: Remote handheld The Range Indoor pollution is a growing problem with air inside our buildings being up to 100 times more polluted than outdoors. Sources of indoor pollution include dust, mould spores, biological contaminants, pollen, tobacco smoke (in care homes and private clubs) and volatile organic compounds. They are especially dangerous to the elderly, infants and allergy sufferers. Xpelair introduces ESSA a unique technology that...

 Open the catalog to page 120
Xpelair Catalogue-122

industrialVentilation Industrial fans are used in a wide range of commercial and industrial applications to provide a healthy and safe environment in which to work. Control of Substances Hazardous to Health (COSHH) Regulations are particularly relevant to industrial processes. Introduced in 2002 and amended in 2005 they require employers in all workplaces to control exposure to substances to prevent ill health. Substances include adhesives, cleaning agents, fumes from soldering and welding, naturally occurring substances such as dust and biological agents such as bacteria and other micro organisms....

 Open the catalog to page 122
Xpelair Catalogue-124

Xpelair Scimitar X Sickle blade plate fans Key features The Range Type: Plate mounted axial Xpelair introduces a new gnration of sickle blade fans designed for a wide , .. .. _ . ... . . . . range of commercial and industrial Applicatl0n: Commercia|/lnduStria| ventilation applications. Control options: Electronic/Transformer The blade design optimises airflow speed control performance whilst minimising sound levels. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. Models 驕 Plate and bellmouth: One piece galvanised steel pressing with...

 Open the catalog to page 124
Xpelair Catalogue-126

Xpelair Scimitar XSCS Sickle blade short case fans Key features The Range Xpelair introduces a new gnration of sickle blade fans designed for a wide range of commercial and industrial ducted ventilation applications. The blade design optimises airflow performance whilst minimising sound levels. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. The robust short case is rolled and electro welded with rolled flanges. Cased units are supplied in form B running with motor downstream. The Scimitar range can be installed at any angle and...

 Open the catalog to page 126
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.