FOUNDATION WALL PANELS RENEW YOUR FOUNDATION WALL IN 1-2-3 THE BESTWARRANTY 25Y

TERRA BY STENI FOUNDATION PANEL Terra by STENI is a foundation wall panel made of fibreglass-reinforced stone composite with a surface of aggregated natural stone. It is very suitable for cladding foundations, windbreaks, garages, retaining walls – and more! Foundation panels are available in standard grey, white and black natural stone, and they give your foundation wall a nice and lasting appearance year after year. Our panels have a unique stone core construction, making Terra BY STENI the most robust and easy-to-clean panels on the market. These fibreglass-reinforced stone composite panels...

Screw laths directly on the foundation wall 40 cm apart, measured from centre to centre of the laths. Staple the EPDM joint tape to the laths. The joint tape should cover the entire lath. Cut and pre-drill the panel from the back.Screw distance min. 15 mm from the edge of the panel, max. 300 mm between the screws on the laths. Use STENI Terra screws to fasten the panel to the EPDM-covered laths. Make sure not to over thighten the screw. Leave 4–6 mm of space between the panels. For proper ventilation, make sure there are sufficient openings at the top and bottom. 8–10 mm air gap is recommended...

Since our establishment in 1965, we have delivered more than 48 million square metres of façade panels around the world. STENI AS reserves the right to change product composition and specifications without prior notice. STENI AS accepts no liability for printing errors. // STENI-EN-0320 STENI’s high-quality façade solutions will give your building a unique and enduring architectural expression. An ocean of available surfaces, from colourful and smooth in different gloss levels, to surfaces of aggregated stone in a variety of shades and grades. In addition, we offer printed surfaces so you can...