STAUF XP 10 Levelling compound under elastic and textile floorings Technical Datasheet Product number ^ 133040 Special features ^ self-levelling ^ very easy to sand ^ Low-stress Application range ^ suitable below elastic/textile floor coverings and multi layer wood flooring Suitable subfloors ^ sanded mastic asphalt screed ^ concrete C 25 / 30 according to DIN 1045 (non-skid surface) ^ calcium sulphate (flow) floors ^ STAUF levelling compounds ^ magnesite and plaster floors ^ unlaminated gypsum fibre boards ^ cement floors ^ cavity floors Suitable primers ^ STAUF VDP 130 ^ STAUF VPU 155 S + STAUF quartz sand ^ STAUF D 54 ^ STAUF VDP 160 ^ STAUF VEP 195 + STAUF quartz sand ^ STAUF WEP 180 + STAUF quartz sand Product properties ^ up to 1 mm suitable for castors swivel chairs according to DIN EN 12529 ^ pumpable ^ self-levelling Color ^ light grey Consumption in g/m2 per mm layer ^ 1500g per mm layer thickness Accessibility/ready for foot traffic ^ after 3 hours at 20 °C, max 65% rel. humidity

Ready for installation ^ 24 hours at 20 °C, (with 3 mm layer thickness) max 65% rel. humidity ^ 48 hours (for 5 mm layer thickness) at 20°C, relative humidity 65% max. ^ 72 hours (for 5 - 10 mm layer thickness) at 20°C, relative Additional instructions 1 ^ Without flammable components in accordance with DIN 4102: A1 and DIN EN 13501: A1fl. ^ Under multi-layer wood flooring, at least 3 mm thick layer and if bonded with elastic or hard elastic STAUF wood flooring adhesives Room climate at work site Transport requirements Storage requirements Shelf-life Giscode Emicode Available packaging layer...

SUBFLOOR PREPARATION It must be ensured that the subfloor is ready for installation by performing proper subfloor preparation, floors must be clean, have sufficient surface strength, must be level, permanently dry and free of cracks. A mechanical pretreatment of the subfloor (sweeping, vacuuming, mechanical brushing, sanding, milling, shot blasting) must be performed depending on type and condition of subfloor. Cracks and joints, except expansion joints and other construction joints, shall be solidly closed with STAUF repair resin and floor brackets. Cavities and indentations can be filled with...