STAUF SPU 570
3Pages

STAUF SPU 570 hard 1-component SPU wood flooring adhesive according to ISO 17178 Technical Datasheet Product number Special features well spreadable no danger of migration of any component no adverse interaction with AKZENT parquet sealings varnishes flow asphalt or old substrates high shear strength integrated vapor barrier very good thread formation fast setting vertical finger parquet lamellas, according to DIN EN 14761 solid lamparquet products according to DIN EN 13227 solid planks multiple layer wood flooring according to DIN EN 13489 mosaic parquet according to DIN EN 13488 wood strip flooring according to DIN EN 13226 veneered floor coverings according to DIN 14354 after manufacturer approval Suitable subfloors sanded mastic asphalt screed concrete C 25 / 30 according to DIN 1045 (non-skid surface) calcium sulphate (flow) floors wooden planks, wood fibre boards STAUF levelling compounds for wood flooring chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) cement floors cement floors, concrete floors with residual moisture Suitable primers STAUF VDP 130 STAUF VPU 155 S STAUF VDP 160 STAUF VEP 195 STAUF WEP 180 Suitable levelling compounds

Suitable underlays Product properties ^ STAUF comfort pad ^ STAUF polyester fleece ^ STAUF Decoupling/stress relief board ^ aging-resistant ^ suitable for all subfloors without primer ^ suitable on subfloor heating systems ^ not sensitive to frost ^ rigid installation ^ solvent-free, no labeling required, water-free Color ^ light brown 1000g with STAUF notched trowel no. 3 1300g with STAUF notched trowel no. 4 1150g with STAUF notched trowel no. 5 1900g with STAUF notched trowel no. 12 1600g with STAUF notched trowel no. 14 Open time ^ approx. 25 minutes at 20 °C Accessibility ^ after 12 -...

PROCESSING Apply adhesive to sub floor using the appropriate STAUF notched trowel, avoid adhesive pooling and excessive layer thickness by evenly raking the notched trowel over adhesive layer. Install wood flooring during specified open time, slide in and press down firmly. In particular with raw wood flooring, avoided pushing adhesive into joints. Depending on the degree of setting, adhesive residues can be removed with the appropriate STAUF cleaners. Please test the effect of the cleaner on the finish of the wood flooring in an inconspicuous area or on a sample prior to applying the...