STAUF S PRESS 1-component hard elastic SPU wood flooring adhesive according to ISO 17178 Technical Datasheet Product number Special features reduced tension bonding adhesive residues easy to remove solvent-free, no labeling required, water-free no wood swelling vertical finger parquet lamellas, according to DIN EN 14761, from 16 mm thickness solid planks, with relation width/thickness max. 7:1 multiple layer wood flooring according to DIN EN 13489 mosaic parquet according to DIN EN 13488 wood strip flooring raw according to DIN EN 13226, max. 75 x 600 mm, min. 14 mm thickness Suitable subfloors sanded mastic asphalt screed concrete C 25 / 30 according to DIN 1045 (non-skid surface) calcium sulphate (flow) floors STAUF levelling compounds for wood flooring chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) cement floors Suitable primers STAUF VDP 130 STAUF VPU 155 S STAUF VDP 160 STAUF VEP 195 STAUF WEP 180 Suitable levelling compounds STAUF XP 20 STAUF FZ STAUF RM STAUF SSP RAPID Suitable underlays STAUF polyester fleece STAUF Decoupling/stress relief board Product properties

^ not sensitive to frost ^ fast setting ^ solvent-free, no labeling required, water-free Color ^ beige Required quantities per m2 ^ approx. 1050 g/m2 for mosaic parquet ^ approx. 1300 g/m2 fo rwood strip flooring, upright mosaic parquet lamellas ^ approx. 1300 g/m2 for multiple layer wood flooring Open time ^ approx. 30 minutes at 20 °C Accessibility ^ after approx. 24 hours ^ Grinding/polishing: after 24-48 hours Room climate at work site ^ Minimum 18 °C, maximum 75% rel. humidity, preferably max. ^ cool Shelf-life ^ 9 months Available Packaging ^ 1800 ml aluminum bag (K approx. 63 mm) EXAMINATION...

PROCESSING Apply the adhesive to the substrate using the applicator machine. Pull the applicator at an even speed in order to keep the layer sufficiently thin and to avoid areas of accumulation. Lay the parquet flooring onto the adhesive layer within the specified laying time. Position the parquet correctly and then press down firmly. In particular with raw wood flooring, avoided pushing adhesive into joints. Adhesive in joints can impair subsequent surface treatment. Depending on the degree of setting, adhesive residues can be removed with the appropriate STAUF cleaners. Please test the effect...