STAUF PUK 410
3Pages

{{requestButtons}}

Catalog excerpts

STAUF PUK 410 - 1

STAUF PUK 410 Hard 1-component polyurethane wood flooring adhesive according to ISO 17178 Technical Datasheet Product number Special features very low density very low consumption long open time universal use high shear strength controlled foaming very well spreadable ProForce Tutorial-Clip vertical finger parquet lamellas, according to DIN EN 14761 solid lamparquet products according to DIN EN 13227 solid planks multiple layer wood flooring according to DIN EN 13489 mosaic parquet according to DIN EN 13488 wood strip flooring according to DIN EN 13226 Suitable subfloors sanded mastic asphalt screed concrete C 25 / 30 according to DIN 1045 (non-skid surface) calcium sulphate (flow) floors wooden planks, wood fibre boards STAUF levelling compounds for wood flooring chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) cement floors Suitable primers STAUF VDP 130 STAUF VPU 155 S STAUF VDP 160 STAUF VEP 195 STAUF WEP 180 Suitable levelling compounds STAUF XP 20 STAUF FZ STAUF RM STAUF

Open the catalog to page 1
STAUF PUK 410 - 2

^ STAUF polyester fleece ^ STAUF Decoupling/stress relief board Product properties ^ aging-resistant ^ suitable on subfloor heating systems ^ not sensitive to frost ^ very low emission ^ fast setting 650g with STAUF notched trowel no. 3 950g with STAUF notched trowel no. 4 750g with STAUF notched trowel no. 5 1400g with STAUF notched trowel no. 14 Open time ^ approx. 45 minutes at 20 °C Accessibility ^ after 12 - 24 hours ^ Grinding/polishing: after 24 hours Room climate at work site ^ Minimum 18 °C, maximum 75% rel. humidity, preferably max. ^ cool Shelf-life ^ 9 months Available Packaging...

Open the catalog to page 2
STAUF PUK 410 - 3

PROCESSING Apply adhesive to sub floor using the appropriate STAUF notched trowel, avoid adhesive pooling and excessive layer thickness by evenly raking the notched trowel over adhesive layer. Install wood flooring during specified open time, slide in and press down firmly. In particular with raw wood flooring, avoided pushing adhesive into joints. Depending on the degree of setting, adhesive residues can be removed with the appropriate STAUF cleaners. Please test the effect of the cleaner on the finish of the wood flooring in an inconspicuous area or on a sample prior to applying the...

Open the catalog to page 3

All Stauf Klebstoffwerk GmbH catalogs and technical brochures

  1. STAUF SGH 50

    3 Pages

  2. STAUF PU

    3 Pages

  3. STAUF XP 20

    4 Pages

  4. STAUF XP 10

    3 Pages

  5. STAUF D 54

    3 Pages

Archived catalogs