STAUF PU 2 component polyurethane levelling compound Product number ^ 114250 Special features ^ suited for all layer thicknesses ^ water-free ^ no cracks, no shrinkage Application range ^ for levelling of subfloors prior to installation of industry floor coverings with PUR adhesives in heavy-duty areas (stackers, lift trucks). Suitable subfloors ^ sanded mastic asphalt screed ^ calcium sulphate (flow) floors ^ Prefabricated screeds ^ wooden planks, wood fibre boards ^ magnesite and plaster floors ^ chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) ^ cement floors ^ cavity floors Suitable primers ^ STAUF VEP 195 + STAUF quartz sand ^ STAUF WEP 180 + STAUF quartz sand Product properties ^ suitable on subfloor heating systems ^ highly resilient ^ non absorbent ^ self-levelling ^ tension reducing Color ^ beigeConsumption in g/m2 per mm layer ^ 1500g per mm layer thicknessthickness Accessibility/ready for foot traffic ^ after 8 hours at 20 °C, max 65% rel. humidity Ready for installation ^ after 24 hours at 20 °C, max 65% rel. humidity

Room climate at work site ^ Minimum 18 °C, maximum 75% rel. humidity, preferably max. 65% Transport hazard category ^ - ^ cool Shelf-life ^ 9 months Available packaging ^ 12,51 kg plastic bucket layer thickness ^ variable Processing time ^ approx. 30 minutes at 20 °C and 65% rel. humidity Mixing ratio component A ^ 10,8 Mixing ratio component B ^ 1,71 kg EXAMINATION OF SUBFLOOR Prior to processing, the subfloor must be checked according to the standard DIN 18356, DIN 18365 or corresponding national standards. The subfloor shall be resistant to pressure and tension, free of cracks, must have sufficient...

PROCESSING Apply self-levelling compound within specified processing time. Do not pour the compound from mixing beaker on one spot only, but spread over a surface of approx. 2 x 2 m by changing position during pouring. Layer thickness can be controlled by using a wiper or a smoothing trowel. Air the levelling compound using a prickle roller. Self-levelling compounds do not require any additional mechanical spreading and form an even surface by themselves. LIMITATION OF LIABILITY The foregoing representations are based on the results of our most current product and material testing and are of...