STAUF D 54 Very low emission dispersion-based primer Technical Datasheet Product number Special features suited for absorbent and dense substrates dilutable concentrate very economical Application range primer underneath to levelling with STAUF levelling compounds Suitable subfloors sanded mastic asphalt screed concrete C 25 / 30 according to DIN 1045 (non-skid surface) calcium sulphate (flow) floors wooden planks, wood fibre boards chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) stone, ceramic, terrazzo, tiles unlaminated gypsum fibre boards cement floors Product properties suitable on subfloor heating systems good penetration easy to apply fast drying can be diluted with water creates a surface with an even absorptive capacity 130g when applied with roller Drying time 1 hour on absorbent substrates 4 - 8 hrs. on on-absorbent substrates at least 15 hours on calcium sulphate based substrates in combination with cementitious filler compounds Use undiluted on non-absorbent substrates Dilute 1:3 when using on absorbent substrates On poorly a

Room climate at work site ^ Minimum 18 °C, maximum 75% rel. humidity, preferably max. ^ dry ^ cool Shelf-life ^ 12 months Available packaging ^ 5 kg plastic canister EXAMINATION OF SUBFLOOR Prior to processing, the subfloor must be checked according to the standard DIN 18356, DIN 18365 or corresponding national standards. The subfloor shall be resistant to pressure and tension, free of cracks, must have sufficient surface strength, be permanently dry, level, clean and free of from contaminants that may prevent adhesion, sinter layers etc. In addition, porosity and grip of surface need to be checked....

STAUF KLEBSTOFFWERK GMBH . Oberhausener Str. 1 . 57234 Wilnsdorf . Germany Fon: +49 (0) 2739 301-0 . Fax: +49 (0) 2739 301-200 . Email: [email protected]