STAUF COMFORT PAD Cork PUR Foam Underlay, 2 mm thick Technical Datasheet Product number ^ 110290 Special features ^ Sound and heat insulation ^ mechanical decoupling ^ CE approval: ETA-23/0077 Application range ^ for impact sound insulation and as stress relief board Suitable subfloors ^ sanded mastic asphalt screed ^ calcium sulphate (flow) floors ^ wooden planks, wood fibre boards ^ STAUF levelling compounds ^ chipboards (P4 to P7), OSB boards (OSB/2 to OSB/4) ^ stone, ceramic, terrazzo, tiles ^ unlaminated gypsum fibre boards ^ cement floors Product properties ^ permeable ^ elastic ^ suitable on subfloor heating systems ^ Polyurethane-bonded cork-foam-granules ^ heat insulating ^ increases living and walking comfort Color ^ Approx. 90 minutes at 20°C Additional instructions ^ Selection of adhesive: sub floor preparation, priming and levelling according to subsequent type of parquet installation. Use STAUF Polyurethane parquet adhesives. Before using other adhesives please consult the STAUF application engineering department. For parquet installation, preferably use the same adhesives used for bonding of parquet underlay.

Storage requirements Available packaging thermal conduction resistance impact sound insulation depending on the construction height 16-25dB (according to ISO 140-8) EXAMINATION OF SUBFLOOR Prior to processing, the subfloor must be checked according to the standard DIN 18356, DIN 18365 or corresponding national standards. The subfloor shall be resistant to pressure and tension, free of cracks, must have sufficient surface strength, be permanently dry, level, clean and free of from contaminants that may prevent adhesion, sinter layers etc. In addition, porosity and grip of surface need to be checked....