Maxilift 2.0
15Pages

Stannah Maxilift 2.0 passenger lift range Lift finishes and options

Designed with modern living in mind the Maxilift 2.0 offers clean, sleek lines and smooth operation. We have a variety of car finish styles to suit every budget. Our customers can mix and match to ensure the lift complements the interior of any building. Contents • Car walls • Car ceilings • Car floors • Car operating panels • Landing controls and indicators • Mirrors and handrails • Maxilift 2.0 standard specification • Example configurations Please note: costs may vary and are dependent on the choice of finishes selected.

Samples are available on request – please call: 01264 339090 The colours and designs reproduced in this document have been matched as closely as the scanning and printing process will allow. It is recommended you obtain samples prior to final specification. We are continually developing and improving our range of products and finishes and we therefore reserve the right to alter or amend the specification without prior notice. Silver Grey Slate Blue Cream Swirl Vinyl skinplates Please note All skirting, corner profiling and entrance returns are satin stainless steel as standard excluding...

Car ceilings Panel Please note All suspended ceilings with stainless steel finish as standard. All ceilings are available with standard halogen lighting (no. of lights is dependent on cabin size) or high energy efficiency (LED). O55 Mirror stainless steel and plexiglass diffuser. 3x fluorescent tubes. O3 Mirror stainless steel and plexiglass diffuser. 2x fluorescent tubes + 4x LED spots. O14 Mirror stainless steel and plexiglass diffuser. 4x fluorescent tubes. O11 Mirror stainless steel and plexiglass diffuser. 4x fluorescent tubes. O10 Mirror stainless steel and plexiglass diffuser. 3x...

Samples are available on request – please call: 01264 339090 The colours and designs reproduced in this document have been matched as closely as the scanning and printing process will allow. It is recommended you obtain samples prior to final specification. We are continually developing and improving our range of products and finishes and we therefore reserve the right to alter or amend the specification without prior notice. Car floors Black Sparkle Grey Sparkle Dark Cherry Grey Chestnut Laminate flooring† Artificial granite† PREVIOUS SECTION NEXT SECTION Please note: Floors can be left...

Standard car operating panel 200mm(w) x 2000mm(h) Satin stainless steel with dot matrix position and direction of travel indicator (LCD position indicator optional) Push buttons MT42 Radius cornered squares 30 x 30mm Satin stainless steel or mirror stainless steel PREVIOUS SECTION NEXT SECTION MAXILIFT 2.0 - SECTION 4: CAR OPERATING PANELS

Landing controls & indicators Landing indicators† 230mm(w) x 92mm(h) x 20mm(d) Satin stainless steel SMRQ 909DMA Landing operating panels† Standard configurations Flush mounted Surface mounted Single button collective. Single button collective. Optional highest call-down collective. Optional highest call-down collective. Surface mounted Fully directional call collective. 88mm(w) x 202.4mm(h) SMSC 600 PREVIOUS SECTION NEXT SECTION ADDITIONAL NOTES Please note: SMRQ & SMSC call button panels shown can be surface mounted direct onto wall or lift architrave – no need for apertures MAXILIFT 2.0...

Mirrors and handrails Mirrors K3 mirror stainless steel available as standard. EN81-70 compliant. K2a mirror stainless steel available as standard. EN81-70 non-compliant. Half height, full width mirror fitted as standard PREVIOUS SECTION Full height and narrow options available NEXT SECTION MAXILIFT 2.0 – SECTION 6: MIRRORS AND HANDRAILS

Lift car: fabricated steel lift car frame including header assembly, platform buffer plates and guide shoes with lubricators Car & landing doors: finished in stainless steel Doors: 2hr fire-rated doors in 800, 900 & 1000mm width, 2000mm height Communication options: EN81-28 compliant autodialler Motor drive type: electronic hydraulic valve with optional VVVF drive, MRL Configuration: cantilever sling design mounted on a load-bearing wall Rated speed: up to 1 m/s Additional standard features: • Automatic relevelling to landing floor • Anti-creep device to prevent movement away from landing •...

Walls & skirting: Silver Grey (F12 PPS) vinyl skinplate Handrail: K3 mirror stainless steel handrail Car operating panel: Standard satin stainless steel Ceiling: Panel (O55) Stainless steel mirror and plexiglass 3x fluorescent tubes MAXILIFT 2.0 - SECTION 9: EXAMPLE CONFIGURATION 1

Walls & skirting: Satin stainless steel Handrail: Custom handrail Car operating panel: Standard satin stainless steel with round push buttons Ceiling: Aperture (O10) Mirror stainless steel and plexiglass 3x fluorescent tubes MAXILIFT 2.0 - SECTION 9: EXAMPLE CONFIGURATION 2

Walls & skirting: Redwood (DU5610HG) laminate and satin stainless steel Handrail: Custom handrail Car operating panel: Standard satin stainless steel with round push buttons Ceiling: Panel (O55) Stainless steel mirror and plexiglass 3x fluorescent tubes MAXILIFT 2.0 - SECTION 9: EXAMPLE CONFIGURATION 3

Additional notes

Additional notes – landing controls & indicators LANDING CONTROLS & INDICATORS • Travel indicators The landing lift travel indicator is on all landing levels. • Landing control options There are an array of options within the display including LED or LCD and round instead of square buttons. For further details please contact us. MAXILIFT 2.0 – ADDITIONAL NOTES – LANDING CONTROLS & IND

The Stannah Promise Always true to our word Stannah Lifts Anton Mill, Andover, Hampshire SP1 0 2NX Telephone: 01264 339090