• StadurFoam surfaces must be protected from direct sunlight and the effects of the weather. The dark outer surface layers must be covered with a white, opaque film, as otherwise the material may deform, and care must be taken to ensure that the product is stored indoors before it is installed.

1. Deviating tolerances must be agreed separately. 2. Unfoiled surfaces are not protected against the effects of weather and damage. Scratches, corrosion and soiling cannot be ruled out. 3. Deformation may occur if the sandwich panels are asymmetrically constructed. 4. Technical data of the individual products can be found in the respective technical data sheet and the associated standard. 5. Desired colours must be matched using retained samples and a LAB value determination. 6. Instructions from the Stadur processing guidelines must be observed. 7. Milling irregularities cannot be ruled out...