MAIN CHARACTERISTICS An improved hardware with cases in the locking points that prolong the durability of the locks and reduce friction wear and at the same time facilitates a greater smoothness when locking. RETURN ANGLES including a Soft encased locking point TERMINAL LOCKING POINT A part made from stamped steel that incorporates a Soft locking point. This is designed to be fitted after any sash hardware part has been installed: friction stays, return angles and cremone transmission covers. FRICTION STAY Supplied with an encased cam with a tightening adjustment of ± 1 mm *NOTE: This improvement can be applied to all existing friction stays using the same references. INTERMEDIATE LOCKING POINT Allows insertion of all the locking points that are necessary for windows of large dimensions. It incorporates a Soft locking point and anti-looseness clip. ENCASED Encasquillado Herraje HARDWARE For Euro-Groove para canal europeo POINTER For window tilting. It incorporates a Soft locking point and anti-looseness clip OPERATING ROD LOCKING POINT Soft rivets avaialble encased in cannulas for TFS-04, TFS-05 y/o TFS-06 ((VALID FOR EXISTING TFS CODES)) VÁLIDO PARA CÓDIGOS ACTUALES DE LAS TFS) Sistemas Técnicos del Accesorio y Componentes, S. L. T +34 981 817 036 F +34 981 817 037 SISTEMAS TÉCNICOS DEL ACCESORIO Y COMPONENTES

ACCESSORIES & KITS RECOMMENDED CONFIGURATIONS EVO-SOFT KITS EVO-SOFT INTERMEDIATE LOCKING POINT KIT BASE KITS FRAME CLOSING FRAME CLOSING / TILT-TURN 2 EVO-SOFT TERMINAL LOCKING POINT KIT 113004C 3 RETURN ANGLE SUPPLEMENTARY EVO-SOFT KIT 112103C 4 EVO-SOFT OPERATING ROD LOCKING POINT KIT 0511149 BASE KIT FOR LOCKING TO INVERTER L > 1000 mm Friction stay and cremone handle FRAME CLOSING BASE KITS: 5 TILT LOCKING POINT KIT 110200 “**”: Corresponds to nish: 01 White, 02 Black, etc. es un producto exclusivo de Friction stay and cremone handle BASE KIT: with EVO-SOFT intermédiate locking points or...