Glass in interior design (Backlighting has been taken out of production)
27Pages

EXPERIENCE TRANSPARENCY GLASS ININTERIOR DESIGN >

Page 4 SOPHISTICATED GLASS-BASED ROOM DESIGN Rooms bathed in light, visual spaciousness and transparency are major features of contemporary architecture. More allowance than ever before is being made for light as the key to life and rooms are re-flecting this clearly in modern interior design. Glass is a more suitable material than any other to give light sufficient scope to exploit its full potential.State-of-the-art processing and safety technologies have helped to make it possible for glass to be used flexibly and creatively in interior design today. The architect is no longer forced to...

26. 5 26. 5 mm standard distancebetween the wall and the rail axis >

Double ceiling railUpper transverse profile Lower transverse profileDouble floor rail

THE ALTERNATIVE TO CURTAIN FABRICS The SPRINZ GLASS CURTAIN is a high-quality alternative to curtain fabrics and a uniquely striking contribution to contemporary interior design for pri-vate homes and business premises. The sliding glass curtain is a particularly effective solution for rooms with computer workstations, because irritating light shining in from outside can be stopped quickly and specifically.State-of-the-art screen printing technology gives you plenty of scope for creative design here. You can have the glass curtains produced partly or completely in your corporate colours or...

Glass dimensions = (clearance - 12 mm) >

WE MAKE WALLS GLOW: backlit wall glass from SPRINZ is a convincing entry into new dimensions. Because highly individual design solutions are possible with a total structure thickness of only 100 mm.The support plates are already assembled when supplied, hold the entire cold cathode tube lighting system and guarantee consistent illumination. The glass elements are available in different heights and can be designed individually. BACKLIT WALL GLASS You have the choice of glass 8 mm or 10 mm thick. The total thickness of the structure, including the backlighting, is only 100 mm. The finish can...

Walk-on glass elements such as stairs, floors, land-ings or light openings are compelling features of interior design concepts. Transparent glass com-municates effortlessness and elegance. Impressive effects can be achieved according to the configur-ation and design that are chosen.The laminated glass is made up of three or more individual panes. The top layer of glass consists of SPRIDUR toughened safety glass or partly pre-stressed glass and provides protection against dam-age and impact. Glass structures have to comply with the DIN 1055 standard where dead weight and planned working...

Stair system made from laminated glass for a retail outlet. With slip-resistant screen-printed squares supported on a frame structure. Very attractive integration in the overall environment. CERTAIN GLASS SURFACES ARE EXEMPTED FROM APPROVAL IN INDIVIDUAL CASES (ZIE) (Excerpt from the ZiE exemption ruling as announced by the Baden-Wrttemberg Ministry of Economics on 03.12.2003) > SPRINZ has the component test documentation on which Tables 1+2 are based. An application for general approval by the building supervisory authorities has been submitted to the DIBt. Walk-on glass surfaces with...

min 90 1 000 The conditions for use of glassed-in banisters that prevent accidents are specified in the January 2003 version of the Technical regulations about the use of glassed-in banisters that prevent accidentsӔ (ab-breviation: TRAV). > min 90 90-2501 000-1 600 90-250 TRAV CONDITIONS FOR USE: > Glassed-in banisters that prevent accidents, made from laminated glass with category C SPRI-POINT 40/8. Crystal-clear transparency. Category A: Linear support of vertical glass surfaces as specified in the TRLV, which do not have a loadbearing or projecting banister crossbar at the height...

THE DETAILS In addition to special visual appeal, BASIC and MODERN stand for quality and comfort. The cubicles are spacious and easily accessible. The toughened safety glass 10 mm thick has a high-quality screen-printed finish. The surfaces are easy to clean and hygienic.The details speak for themselves too. Door handles, fittings, feet and supports have a glossy chrome fin-ish. The covers are available with either a glossy or matt chrome finish. The fittings are flush on both sides, recessed in the glass and covered stylishly.The stiffening element is also made from rugged, toughened...

TWS 200 BASIC partition wall system with full-surface white screen printing and unobtrusive fittings with a matt chrome finish. The 4-colour screen printing makes a colourful and lively impression. Kurbad Rotherma, Gaggenau. > WC partition wall and entrance door, Munich club P1. TWS 200 MODERN with printed motifs. TWS 200 BASIC partition wall with Pattern 11 > 4849 4849 size="-1">

THE PATTERNS FOR TWS 200 BASIC Pattern 01 Pattern 02 The patterns in black, grey and white produce a special three-dimensional effect and thus make a room look larger. A particular feature is that the screen-printed patterns lead to a gradual transi-tion from one cubicle to the next when cubicles are installed in rows next to each other. TECHNICAL CONFIGURATION MODERN / BASIC TWS 200 BASIC Model ADoorSide section Partition wall Stiffening element Complete set of fittings for type ADoorSide section Complete set of fittings for type BDoorSide section Partition wall Stiffening element Complete...

Subject to amendment when technical changes are made. 310.09GB.07/2007LL ַ There may be differences between the actual colours of the products and the pictures in the catalogue. Reg.-No. 98-005 Joh. Sprinz GmbH & Co. KGPostfach 2148D-88192 Ravensburg TELEPHONE +49 751 379-0 FAX +49 751 379-62 INTERNET www.sprinz.eu E-MAIL info@sprinz.eu >