SOPRADERE
2Pages

TECHNICAL DATA SHEET n° DTE 14-065_EN cancels and replaces N° DTE 13-001_EN SOPRADERE SOPRADERE is a ready-to-use cold applied bitumen primer composed of bitumen, volatile solvents and adhesive additives. In accordance with French Code of Practice DTU 43 (NF P 84-204). User application SOPRADERE is used as cold-applied primer to increase adhesion for bitumen-based waterproofing membranes. It is also used as bituminous coating for buried walls and foundations. All the applications are described in Technical Approval or SOPREMA’s Technical Guidelines in force. Composition SOPRADERE Physical state Dry content Density at 20°C Black homogeneous liquid, leaving a slightly sticky black film once dry > 40 % of weight about 950 kg/m3 (± 50) Flash point (ASTM D 56) Drying time on concrete Less than 1 hour Packaging SOPRADERE Packaging Cans of 5 or 30 liters Consumption depends on the uses and the substrate. On rough and absorbent substrate (i.e concrete, wood) : - 5 L can cover about 20 m² - 30 L can cover about 120 m² On smooth, non absorbent substrate (i.e metal), the average consumption may be lower. The product can be stored until 12 months at a temperature above 0°C and protected from the sun. SOPREMA SAS with a Capital of 50 000 000 € - Headquarter: 14 rue de Saint-Nazaire – 67100 STRASBO URG – FRANCE Postal adress: CS 60121 67025 STRASBOURG CEDEX. RCS STRASBOURG: 314 527 557.SOPREMA reserves the right to amend the composition of its material and consequently their prices, without prior notice. For this reason, all orders will be accepted only in accordance with the conditions and technical specifications in force at the date of order. Tel: + 33 (0) 3 88 79 84 84 – Fax. : + 33 (0) 3 88 79 84 85 www.soprema.com - E-mail : e

TECHNICAL DATA SHEET n° DTE 14-065_EN cancels and replaces N° DTE 13-001_EN Installation Before use, well homogenize SOPRADERE. The tools used (roll, brush, rubber squeegee) must be clean. SOPRADERE must be applied with a brush or a roller onto dry, clean surfaces, free of all dust and nonadhesive parts (concrete, wood, metal ... previously degreased). Let dry completely before apply the waterproofing membrane. Cleaning tools: Petroleum solvent (white spirit, xylene for example). Special indications Hygiene, health and environment: - Flammable: keep away from flames and sparks during use. -...