video corpo

FLAGON

FLAGON
1 / 36 PagesView full catalog

FLAGON

Product catalog summary
Introduction
Flag-Soprema provides a variety of TPO and PVC single ply membranes for applications such as ballasted roofs, inverted roofs, and roof gardens. These membranes are designed for durability and aesthetic appeal, with options like Copper Art® and Silver Art® offering the appearance of traditional metal roofing at a reduced cost.
System Design and Installation
Flagon PVC: Known for toughness and weather resistance, these membranes are flexible, puncture-resistant, and adaptable to structural movement, suitable for new builds and refurbishments with a life expectancy of over 40 years.
Flagon TPO: Noted for weldability, flexibility, and environmental friendliness, these membranes are compatible with various insulation types and have a life expectancy of over 30 years.
Copper Art® and Silver Art®
These systems offer the look of metal roofing without the risks, being lightweight, easy to install, and compatible with various substrates.
Environmental Commitment
Flag-Soprema emphasizes sustainability, with recyclable PVC and TPO membranes and a manufacturing process that minimizes emissions and environmental impact.
FS-Thermshield Thermal Insulation
This range includes high-performance, CFC/HCFC-free insulation boards with low thermal conductivity, suitable for warm and inverted roof applications, including PIR and extruded polystyrene boards.
Product Overview
FS-Thermshield EP LG-X is an extruded polystyrene board with a cementitious layer for protection, suitable for exposed locations requiring self-protection.
Roofing Systems
Details various systems using Flagon PVC and TPO membranes, including ballasted, fully adhered, and mechanically fixed systems, designed for specific conditions like pedestrian or vehicular traffic.
Installation Procedures
  • Ballasted Roof System: Waterproof layers are laid with overlaps and fixed using peel stop bars.
  • Fully Adhered System: Uses Flexicol W adhesive with geotextile layers for improved adhesion and stress distribution.
  • Mechanically Fixed System: Membranes are fixed based on wind load criteria, with additional fixings in perimeter and corner zones.
General Laying Instructions
  • Storage: Membranes should be stored dry and protected from moisture.
  • Perimeter Fixing: Requires Flagon bars and TPO/PVC cords for secure attachment.
  • Welding: Includes manual and automatic methods, with specific procedures for spot, pre-welding, and finish welding.
Accessories and Additional Components
Use of prefabricated corners and fittings from the Flagon TPO range is recommended for compatibility. Flagmetal laminate sections are used for flashings and cappings.
Quality Checks
The contrasting colors of Flagon TPO membranes allow for easy identification of damage during installation, ensuring integrity and facilitating repairs.
Welding Integrity Checks
  • Mechanical Testing: Conducted using a seam probe to detect defects in the weld, essential when the material is cold. Defective areas must be cleaned and re-welded.
  • Destructive Testing: Involves a tensile test by peel testing a sample of the weld, based on UEAtc Directive provisions, done daily before installation.
Roofing Systems Installation
  • Ballasted Roof System: Waterproof layers are laid with overlaps, with vertical upstands and details formed after horizontal sheets.
  • Exposed Roof (Mechanically Fixed): Sheets are laid to cross metal deck ribs at right angles, with fixing design considering support nature, roof shape, building height, wind speed, and topography.
  • Fully Adhered Roof: Uses Flexicol W adhesive, with spot-welding, pre-welding, and finish welding, avoiding adhesive contamination on welding edges.
Flag-Soprema Systems
  • Sopralene: Torch-on membranes with SBS elastomeric bitumen and polyester reinforcement for waterproofing applications.
  • Duoflex: A hot-melt system providing a durable, flexible, and self-healing barrier.
  • Alsan RS: Cold-applied liquid resin systems offering seamless waterproofing with fast cure times.
  • Optigreen: Green roofing solutions promoting biodiversity with insulation and drainage layers.
  • Metadeck: Profiled metal roofing systems offering design flexibility.
Sopracover Warranty Scheme
  • Provides comprehensive coverage including consequential loss, product liability, and workmanship.
  • Insurance is transferable to new building owners and includes inspections at years 10 and 20, with no compulsory maintenance agreements required.
See more

Catalog excerpts

FLAGON -1

YOUR ROOFING AND WATERPROOFING PARTNER L68132:JJ42:JY50 CI/SfB (47) Ln5/n6 March 2010 PVC AND TPO SINGLE PLY ROOFING SYSTEMS Uniclass

 Open the catalog to page 1
FLAGON -2

2 www.flag-soprema.co.uk World class systems for single ply roofing Contents Introduction 3 n Modern membranes for any substrate 3 n Applications 3 n Flag-Soprema single ply membranes 4 n Roof types 5 System design and installation 6 n Flagon PVC 6 n Flagon TPO 8 n Copper Art® and Silver Art® 10 n Environmental commitment 12 n FS-Thermshield thermal insulation 13 n Flagon PVC application details 14 n Flagon PVC installation 18 n Flagon TPO application details 22 n Flagon TPO installation 26 Our systems 32 Other Flag-Soprema systems 34 Sopracover warranty scheme 35 The Single Ply Roofing Association...

 Open the catalog to page 2
FLAGON -3

YOUR ROOFING AND WATERPROOFING PARTNER T: 0845 1948727 3 Introduction Modern membranes for any substrate Flag-Soprema offers a comprehensive range of TPO and PVC single ply membranes for wide-ranging applications. Our 40 yearplus track record in the roofing, civil engineering and hydraulic sectors has given us the experience and product development expertise to secure a market-leading position. In addition our Copper Art® and Silver Art® systems have the aesthetic quality of traditional metal roofing at a fraction of the cost. Each membrane is designed to meet the requirements of particular applications...

 Open the catalog to page 3
FLAGON -4

4 www.flag-soprema.co.uk World class systems for single ply roofing In addition to our metallic finished Copper Art® and Silver Art® range, which is featured on page 10-11, Flagon membranes are also available in three standard shades for use with our décor profiles. Available in zinc, lead and verdigris, they provide a pleasing alternative to folded or standing seam metal covering. Flagon membranes are also available in any RAL colour as well as graphic treatments such as a symbols, trade marks or logos. Contact Flag-Soprema directly for more information. Flag-Soprema single ply membranes Flagon...

 Open the catalog to page 4
FLAGON -5

YOUR ROOFING AND WATERPROOFING PARTNER T: 0845 1948727 5 Roof types Ballasted roof systems not for pedestrian traffic Ballasted roof systems for pedestrian traffic Ballasted roof systems with roof garden Fully adhered system Mechanically fixed system Ballasted roof systems (protected) Exposed roof systems (unprotected) Ballast layer Waterproof membrane Protection layer Substrate Finished surface and protection layer Protection layer FS-Thermshield insulation Waterproof membrane Substrate Vegetation layer Vegetation mat Ballast layer Rigidity and weight distribution Filtration mat Protection layer...

 Open the catalog to page 5
FLAGON -6

6 www.flag-soprema.co.uk World class systems for single ply roofing Flagon PVC Flagon PVC is a tough, weather resistant membrane that has excellent puncture and rot resistance. Key characteristics of Flagon PVC membranes: n Flexible in low temperatures n Unaffected by hot/cold cycles n High mechanical resistance n Resistant to static and dynamic puncturing n Vapour permeability n Adaptable to structural movement n Resistant to root growth and micro-organisms n Will not rot n Resistant to weathering and UV radiation n The surface colours may be chosen from the RAL range n Glass mesh-reinforced...

 Open the catalog to page 6
FLAGON -7

YOUR ROOFING AND WATERPROOFING PARTNER T: 0845 1948727 7 Manufacturing process There are two main processes for Flagon PVC: Co-Extrusion Raw materials are passed through a chamber, heated and pressed into a co-extrusion head and then laminated. Membrane thickness is automatically adjusted to obtain a single-layer homogeneous, non-reinforced membrane with high tensile properties and high resistance to static and dynamic puncturing. This process can also produce a two-colour, single-layer membrane with a signal layer. Caste Spreading This process creates a waterproof membrane with an integral reinforcement...

 Open the catalog to page 7
FLAGON -8

8 www.flag-soprema.co.uk World class systems for single ply roofing Flagon TPO Our Flagon TPO membranes have a unique formulation. Flagon EP is the only TPO single ply membrane with a certified BRE Green Guide A+ rating. Key characteristics of Flagon TPO membranes: n Excellent weldability n Softness and flexibility n Excellent dimensional stability n High weather and UV resistance n Non-toxic n Resistant to a wide range of chemical attacks n Compatible with most insulation including expanded and extruded polystyrene n Compatible with oxidised bitumen n Highly resistant to puncturing n Resistant...

 Open the catalog to page 8
FLAGON -9

Manufacturing process There are two main processes for Flagon TPO: Co-Extrusion Raw materials are passed through a chamber, heated and pressed into a co-extrusion head and then laminated. Membrane thickness is automatically adjusted to obtain a single-layer homogeneous, non-reinforced membrane with high tensile properties and high resistance to static and dynamic puncturing. This process can also produce a two-colour, single-layer membrane with a signal layer. Tri-Extrusion This technique was developed by and is unique to Flag-Soprema. The tri-extrusion is done in a single pass, encapsulating...

 Open the catalog to page 9
FLAGON -10

10 www.flag-soprema.co.uk World class systems for single ply roofing Copper Art® and Silver Art® Flag-Soprema has combined the beauty of traditional materials with modern technology to create Copper Art®/Silver Art®, an easily installed membrane system that reproduces the beauty of traditional metal roofing. Fine metal powder (copper or aluminium) is incorporated into the membrane to give it the same aesthetic qualities as the metal itself. Copper Art® and Silver Art® give you the aesthetic benefits of traditional metal roofing with the added benefit of reduced costs and the performance benefits...

 Open the catalog to page 10
FLAGON -11

YOUR ROOFING AND WATERPROOFING PARTNER T: 0845 1948727 11 Copper Art® Copper Art® uses real copper powder combined with thermo-plastic to create a membrane that oxidises in the same way as traditional copper roofing. When exposed to the elements the membrane will gradually change with age, from a tawny brown to dark brown. Silver Art® Silver Art® uses aluminium particles as an integral part of the waterproofing membrane resulting in long-term stability of colour. Additionally, the UV reflectivity of Silver Art® reduces heat build-up within the system during summer months.

 Open the catalog to page 11

Archived catalogs

  1. WALKWAY

    2  Pages

  2. HYDRAULIC WORKS

    22  Pages

  3. SWIMMING POOL

    8  Pages

  4. TPO SAFETY

    8  Pages

  5. FLAGON TPO

    8  Pages

  6. PVC SAFETY

    8  Pages

  7. ALPHASURE

    4  Pages

  8. DUOFLEX

    32  Pages

  9. METADECK

    52  Pages

  10. SOPRALENE

    24  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.