*myarchiexpo

Catalogs
SOPREMA
FLAGON TPO

FLAGON TPO

Product catalog summary

Overview: The document provides detailed specifications and features of FLAGON TPO synthetic roofing membranes, specifically the FLAGON EP/PV, EP/PR, EP/PR-F, and EP/PV-F variants. These membranes are designed for roofing applications and are characterized by their resistance to weathering, ultraviolet rays, and mechanical stress.

Specifications:

Thickness and Weight: Available in thicknesses ranging from 1.2 mm to 2.5 mm, with corresponding weights from 1.15 Kg/m² to 2.52 Kg/m².
Tensile Strength: Minimum tensile strength of 9.0 N/mm² for EP/PV and 1100 N/5 cm for EP/PR and EP/PR-F.
Elongation to Break: ≥ 550% for EP/PV and ≥ 15% for EP/PR and EP/PR-F.
Resistance to Impact: Ranges from ≥ 400 mm to ≥ 1650 mm depending on the product variant.
Cold Bending: All variants maintain flexibility at temperatures as low as -40°C.
Hydrostatic Pressure Resistance: All products are waterproof under 0.5 MPa pressure for 6 hours.

Features:

High resistance to weathering and UV rays.
Dimensional stability and adaptability to structural movements.
Excellent weldability and mechanical resistance.
Non-toxic and environmentally compatible.

Applications:

Suitable for various roofing systems including movable ballast, rigid ballast, and mechanical fastening systems.
Can be used on horizontal surfaces, vertical details, and for roof gardens.

Production and Standards:

Manufactured in facilities certified under UNI EN ISO 9001:2000 and UNI EN ISO 14001:2004.
Installation by approved installers with accessories manufactured by Flag S.p.A.

Environmental Considerations: The liners are not subject to EEC 79/831 regulation on dangerous substances. Disposal should be through authorized landfill sites or incinerators with appropriate systems.

Catalog excerpts

FLAGON TPO ROOFING SYNTHETIC MEMBRANES FLAGON EP/PV TPO+Plus

Open the catalog to page 1

FLAGON EP/PV Due to its formulation, the liner is NOT subject to the requirements set forth in the EEC 79/831 regulation on dangerous substances. If the product should be disposed of as waste, we recommend sending it to an authorised landfill site or to an incinerator equipped with post-combustion chamber and fume washing system. FLAGON EP/PV 120 FLAGON EP/PV 150 FLAGON EP/PV 180 FLAGON EP/PV 200 FLAGON EP/PV 250 Testing method Thickness (mm) 1,2 1,5 1,8 2,0 2,5 UNI EN 1849 - 2 Weight (Kg/m2) 1,15 1,40 1,68 1,85 2,32 UNI EN 1849 - 2 Tensile strenght (N/mm2) 9,0 9,0 9,0 9,0 9,0 UNI EN 12311 -2...

Open the catalog to page 2

FLAGON TPO ROOFING SYNTHETIC MEMBRANES FLAGON EP/PR TPO+Plus

Open the catalog to page 3

FLAGON EP/PR FLAGON EP/PR 120 FLAGON EP/PR 150 FLAGON EP/PR 180 FLAGON EP/PR 200 FLAGON EP/PR 250 Testing method Thickness (mm) 1,2 1,5 1,8 2,0 2,5 UNI EN 1849 - 2 Weight (Kg/m2) 1,15 1,40 1,68 1,85 2,32 UNI EN 1849 - 2 Tensile strenght (N/5cm) 1100 1100 1100 1100 1100 UNI EN 12311 - 2 (rectangular test specimen) Elongation to break (%) 15 15 15 15 15 UNI EN 12311 - 2 (rectangular test specimen) Tear resistance (N) 300 300 300 300 300 UNI EN 12310 - 2 Resistance to impact (mm) 400 700 900 1150 1650 UNI EN 12691 Cold bending (°C) - 40 - 40 - 40 - 40 - 40 UNI EN 495 - 5 Hydrostatic pressure resistance...

Open the catalog to page 4

FLAGON TPO FLAGON EP/PR-F ROOFING SYNTHETIC MEMBRANES TPO+Plus

Open the catalog to page 5

PHYSICAL-CHEMICAL PROPERTIES FLAGON EP/PR-F DESCRIPTION Synthetic liner of TPO modified polyolefin obtained by co-extrusion, by inserting a polyester mesh and a 200 g/m2 polyester fleece backing. The upper sand grey layer, which is exposed, is characterised by very high resistance to weathering and ultraviolet rays. Manufactured in UNI EN ISO 9001:2000 (Quality System) and UNI EN ISO 14001:2004 (Environmental System) certified plant. Laying by installers approved by Flag S.p.A. Finishing and accessories with elements manufactured and approved by Flag S.p.A. FEATURES • Resistance to weathering...

Open the catalog to page 6

FLAGON TPO FLAGON EP/PV-F ROOFING SYNTHETIC MEMBRANES TPO+Plus

Open the catalog to page 7

PHYSICAL-CHEMICAL PROPERTIES FLAGON EP/PV-F DESCRIPTION Synthetic liner of TPO modified polyolefin obtained by co-extrusion, by inserting a glass fibre and a 200 g/m2 polyester fleece backing. The upper sand grey layer, which is exposed, is characterised by very high resistance to weathering and ultraviolet rays. Manufactured in UNI EN ISO 9001:2000 (Quality System) and UNI EN ISO 14001:2004 (Environmental System) certified plant. Laying by installers approved by Flag S.p.A. Finishing and accessories with elements manufactured and approved by Flag S.p.A. FEATURES • Resistance to weathering and...

Open the catalog to page 8

FLAGON TPO

FLAGON TPO

Catalog excerpts

All SOPREMA catalogs and technical brochures

Archived catalogs