ELASTOCOL 600
2Pages

TECHNICAL DATA SHEET n° DTE 14-021_EN cancels and replaces N° DTE 11-054_EN ELASTOCOL 600 ELASTOCOL 600 is a ready-to-use cold-applied bitumen primer composed of elastomeric bitumen and volatile solvents for self-adhesive waterproofing membranes. User application ELASTOCOL 600 is used as cold-applied primer, to increase adherence for self-adhesive bitumen-based waterproofing membranes (SOPRASOLIN, COLPHENE, SOPRASTICK or SOPRASTICK SI). All the applications are described in the french DTU, SOPREMA’s Technical Guidelines, Technical Approval in force. Characteristics ELASTOCOL 600 Aspect Density at 20°C Dry content Black homogeneous liquid, leaving a slightly sticky black film once dry 900 (±50) kg/m3 about 30% of weight Flash point (ASTM D 56) Drying time on concrete 1 hour depending on temperature and thickness of layer applied Packaging ELASTOCOL 600 Packaging Cans of 1, 5 or 30 liters Consumption depends on the uses and the substrate and is about 0,25 to 0,80 liter / m². On rough and absorbent substrate (i.e concrete, wood) : - 30 L can cover about 37 m² - 5 L can cover about 6,25 m² - 1 L can cover about 1,25 m² On smooth, non absorbent substrate (i.e metal), the average consumption may be lower. - 30 L can cover about 120 m² - 5 L can cover about 25 m² - 1 L can cover about 4 m² The product can be stored until 12 months at a temperature above 0°C in closed original packaging and protected from the sun. SOPREMA SAS with a Capital of 50 000 000 € - Headquarter: 14 rue de Saint-Nazaire – 67100 STRASBO URG – FRANCE Postal adress: CS 60121 67025 STRASBOURG CEDEX. RCS STRASBOURG: 314 527 557.SOPREMA reserves the right to amend the composition of its material and consequently their prices, without prior notice. For this reason, all orders will be accepted only in accordance with the conditions and technical specifications in force at the date of order. Tel: + 33 (0) 3 88 79 84 84 – Fax. : + 33 (0) 3 88 79 84 85 www.soprema.com - E-mai

TECHNICAL DATA SHEET n° DTE 14-021_EN cancels and replaces N° DTE 11-054_EN Installation ELASTOCOL 600 must be well mixed in order to obtain a proper homogenization of components. Ensure that the tools are clean. It will be applied with a brush, a roller or sprayed onto dry, clean surfaces free of non-adhesive materials. Metal surfaces must be degreased beforehand. Let the product dry completely before applying waterproofing membranes. Cleaning tools: Cleaning solvent (white spirit, xylene for example). Special indications Hygiene, health and environment: ELASTOCOL 600 contains Xylene:...