video corpo

AERISOL FLAM
2Pages

{{requestButtons}}

Catalog excerpts

AERISOL FLAM - 1

TECHNICAL DATA SHEET n° DTE 14-006_EN cancels and replaces N° DTE 11-002_EN AERISOL FLAM AERISOL FLAM is a perforated semi-independence screen for weldable waterproofing systems. Both sides are protected by a thermofusible film. User application AERISOL FLAM is an underlayer ensuring the semi-independence of weldable waterproofing membranes. All the applications are described in Technical Approvals or SOPREMA’s Technical Guidelines in force. Composition AERISOL FLAM Reinforcement Heavy duty perforated glass fleece 120 holes of 40 mm diameter / m² (about 15% of the surface) Oxidized bitumen Thermofusible film Thermofusible film Packaging AERISOL FLAM Dimensions of the roll Roll lengths are given with a tolerance of < 1 %. Width of roll is given with a tolerance of 1% (UEAtc). Rolls must be stored upright on flat ground. During storage, protect the rolls against moisture. In cold weather, we recommend that the rolls be kept at a minimum temperature of + 2°C (+ 36 °F) for at least 5 hours before installation. Installation AERISOL FLAM is unrolled , edge to edge, on the substrate (depending of the substrate, coated with a cold-applied primer, for example on concrete). The waterproofing membrane is then fully welded onto AERISOL FLAM, making sure that the melted bitumen flows into the perforations. Hot bitumen must not be used in the bonding process. SOPRE MA SAS with a Capital of 50 00 0 000 € - Headquarter: 14 rue de Sa int-Nazaire – 671 00 STRA SBOURG – FRANCE Postal adress : CS 60121 67025 STRAS BOURG C EDE X. RC S S TR AS BOURG: 314 527 557.SOPREMA reserves the right to amend the composition of its material and consequently their prices, without prior notice. For this reason, all orders will be accepted only in accordance with the conditions and technical specifications in force at the date of order. Tel: + 33 (0) 3 88 79 84 84 – Fax. : + 33 (0) 3 88 79 84 85 www.soprema.com - E-mail : export

Open the catalog to page 1
AERISOL FLAM - 2

TECHNICAL DATA SHEET n° DTE 14-006_EN cancels and replaces N° DTE 11-002_EN Special indications Hygiene, health and environment: The product does not contain any substance likely to be detrimental to health or to environment and complies with generally admitted Health and Safety Requirements. For further information, please refer to relevant Safety Data Sheet. Traceability: Product traceability is ensured through a manufacturing code present on the packaging. Quality control: SOPREMA has always attached the highest importance to the quality of its products, to the respect of environment and...

Open the catalog to page 2

All SOPREMA catalogs and technical brochures

  1. BELOW GRADE

    8 Pages

  2. SOPRADERE

    2 Pages

Archived catalogs

  1. WALKWAY

    2 Pages

  2. TPO SAFETY

    8 Pages

  3. FLAGON TPO

    8 Pages

  4. PVC SAFETY

    8 Pages

  5. ALPHASURE

    4 Pages

  6. DUOFLEX

    32 Pages

  7. METADECK

    52 Pages

  8. FLAGON

    36 Pages

  9. SOPRALENE

    24 Pages