Sonofonic™ Acoustic Clouds Acoustic Clouds take the design of suspended ceiling systems into a new dimension. Manufactured from Sontext’s well-known Sonofonic™ sound absorbing acoustic panels, Acoustic Clouds introduce a variety of shapes to ceiling panels, thus allowing the Interior Designer to break free from the constraints of designing to a standardised rectangular ceiling grid pattern. Sonofonic Acoustic Clouds can be used as a complete ceiling system, or as a localised feature area. Either way, the inherent high performance sound absorbing qualities of Sonofonic panels will enhance the décor of any interior space, and by minimising reverberation or reflected sound, will also provide the occupants with a more comfortable listening and speaking environment. Sonofonic Acoustic Clouds can be fabricated to a large variety of regular, asymmetrical and even three dimensional shapes (see P.2). They may be mounted vertically or horizontally. Regardless of shape, the intrinsic rigidity of the underlying 50mm thick fibrous, light weight insulation also allows the panels to be suspended individually from a ceiling using Sontext’s Spiramount™ hangers (in accordance with Sontext Installation Instructions), without the need for complex furring channel grid systems. . Examples of recommended layouts for Spiramounts are shown below: 6 minimum are recommended per panel for 2400x1200x50mm panels mounted horizontally, and 2 minimum for 1200x600mm panels mounted vertically. Sontext recommend placing the mounts 100-200mm in from all panel edges to keep the maximum span between fixings to about 1 metre each way, and to help hide them from view. Contact Sontext for further installation advice. For more information on the properties of conventional Sonofonic Panels, refer to the Sonofonic Brochure, available from Sontext via the contact details on P.2. Colour Range Sonofonic Acoustic Clouds can be finished to any Pantone colour on request. Contact Sontext to discuss your requirements. Acoustic Performance Thickness (mm) Sound Absorption Co-efficient Acoustic tests were performed to ISO354 (Measurement of Sound Absorption in a Reverberation Room). Sonofonic Panels were tested by Tongji University Institute of Acoustics (Shanghai), with a 200mm air gap behin

Sonofonic Acoustic Clouds—Standard Panel Shapes Panels can be fabricated to virtually any shape up to nominal dimensions of 2400 x 1200mm , including those shown below. For further information, contact Sontext Pty Ltd or its Distributors: Vic Office & Head Office Australia: 685 Burke Road, Camberwell, Victoria, Australia 3124 T: +61 (0)3 9811 4796 E: [email protected] NSW Office: Suite 1a, Level 2, 802 Pacific Hwy, Gordon, NSW, Australia 2702 T: +61 (0)2 9844 5414 For more information, visit: www.sontext.com.au Copyright 2008 by Shamrock Consulting Pty Ltd ,Trading as Sontext P/L, ABN 090...