TAFIPAN P7 MR Structural, moisture resistance particleboard for heavy duty load-bearing applications in humid conditions DESCRIPTION Tafipan P7 MR is a particleboard with high density and sanded surface suitable for covering or laminate. This particleboard show a good behaviour in humid environments, with minimal expected expansion and swelling and has low formaldehyde emission (E1 class). Regarding reaction to fire and according to EN 13986, Tafipan P7 MR is classified as D-s2, d0 (Euroclasse definition by EN 13501-1). In addition to technical performance Tafipan panels are sustainable and environmental products. Please check offer & service brochure for information on sizes and thicknesses available. APPLICATIONS Tafipan P7 MR is suitable for heavy-duty load-bearing applications in humid conditions and be applied in service class 2 (restrictions in temperature and ambient humidity). This particleboard is ideally suitable for applications in the construction and wood frame construction sector, and can also be used for structural floors, walls and roofs and others very demanding applications. RECOMMENDATIONS Boards must be stacked on a hard, level surface and protected from direct contact with water. Pigments added during production of this product in exceptional cases may interfere with certain types of adhesives, should therefore conduct a test before you apply them. Expansion and contraction in wood products is directly related to moisture content and must be considered during design and construction. Wood based panels are biodegradable and can be recycled, follow local regulation for the disposal of residues. MOISTURE RESISTANT

TAFIPAN P7 MR Structural, moisture resistance particleboard for heavy duty load-bearing applications in humid conditions GENERAL CHARACTERISTICS PROPERTY TEST UNIT THICKNESS RANGE (mm) Tolerances on nominal dimensions Thickness EN 324-1 mm ± 0.3 ± 0.3 Density variation within the board EN 323 % ± 10 ± 10 MECHANICAL PROPERTIES PROPERTY TEST UNIT THICKNESS RANGE (mm) Internal bond after cyclic test EN 321 N/mm2 0.28 0.25 Swelling after cyclic test EN 321 % 9 8 Density (reference values) EN 323 Kg/m3 740 730 Tafipan P7 MR boards meet the specifications of EN 312, type P7, and are CE marked. For...