INNOVUS MFC Melamine faced particleboard for use in dry conditions DESCRIPTION INNOVUS MFC is a surfaced particleboard, suitable for non-structural interior applications in dry conditions. INNOVUS MFC surface is easy to clean and scratch and stain resistant. SCRATCH RESISTANT OFFICES & EDUCATION Regarding reaction to fire and according to EN 13986, INNOVUS MFC, with a thickness ≥ 9 mm and a minimum density of 600 Kg/m3, is classified as D-s2, d0 (Euroclasses definition by EN 13501-1). In addition to technical performance INNOVUS MFC panels are sustainable and environmental friendly products. STAIN RESISTANT For further information on available sizes and thicknesses, please see our Offer & Service Brochure. APPLICATIONS INNOVUS MFC durability, design and versatility make it a good choice for residential, public and commercial areas and healthcare applications. As a result if their characteristics INNOVUS MFC is widely used for wall panelling, store fixtures and decoration in general. RESTAURANTS & HOTELS HEALTH & WELLNESS RETAIL & EXHIBITIONS RECOMMENDATIONS INNOVUS panels must be stored in a dry/covered building, stacked on a hard, level surface and protected from direct contact with water. Expansion and contraction in wood products is directly related to moisture content and must be considered during design and construction. Wood based panels are biodegradable and can be recycled, follow local regulation for the disposal of residues. To clean, simply use a cloth dampened in warm water or the usual household cleaning products. Common cleaning products or disinfectants (for example alcohol-based ones) can be used, as long as they do not contain abrasive agents, acids or strongly alkaline substances. Also, bleach or detergent products that contain high levels of chlorine should be avoided.

INNOVUS MFC Melamine faced particleboard for use in dry conditions GENERAL CHARACTERISTICS PROPERTY Tolerance on thickness relative to nominal value Tolerance on thickness within the board Tolerance on length and width Flatness (only for balanced surfaces) TECHNICAL INFORMATION PROPERTY Abrasion resistance – woodgrains & fantasises Abrasion resistance – unicolours Formaldehyde emission class INNOVUS MFC panels are classified according to the criteria defined by EN 14322 - Wood-based panels – Melamine faced boards for interior uses Definition, requirements and classification. For more information...