Shutters V
16Pages

Technical catalogue Balance of light and shade.

Shutters Shutter V Design description External screen shutter type V with roller axle Alu 050 or galvanized steel 070 mm. Weighting profile 020 mm is equipped with guides. Alu extruded guides are painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by motor. Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: H • group control by means of a main switch and/or individual switch; • group...

Control: Usually the motor is controlled by a switch or remote control. The following options are also possible if electrical plans are provided by the manufacturer: • group control by means of a main switch and/or individual switch; • group control by means of a switch and/or individually over remote control; • control in connection with sensors such as: wind/sun/ time/rain sensor; • control in connection with a computer (»smart house« system). Shade name: Shutter V Drive: Motor Cartridge: No Guides: Inox braided cable 0 3 mm Assembling: Onto the window Dimensions:...

Shutters Shade name: Shutter V Drive: Motor Cartridge: No Guides: Inox braided cable 0 5 mm Assembling: Into the ceiling, removed from the window or on facade line. Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2. Design description External screen type Rolo V with Zn plated steel roller axle 070 .Weighting 026 mm profile is equipped with weights. Inox braided cable O 5 mm is fixed with Inox bracket below. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected....

Shade name Shutter V - Balcony design Shade name Shutter V Drive Motor Drive Motor Technical catalogue / Shutters / V

ShuttersShutter V Design description External screen shutter type V with a 043 mm roller galvanized steel axle. Weighting profile 020 mm is equipped with guides. Alu extruded guides painted in RAL upon wish. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass. Shade name: Shutter V Cartridge: No Assembling: Onto the window Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of linen being 16 m2. Shade name Shutter V - Alu guides ID No. SOL V - 005 Drive Manual -...

Drive Manual - windlass Detail Ground plan Shade name Shutter V - under faceade Drive Manual - windlass Detail Assembling under the facade Technical catalogue / Shutters / V

Shutters Shutter V Design description External screen shutter type V with Zn plated steel roller axle 043 mm. Weight profile 020 mm is equipped with guides. Inox braided cable O 3 mm is fixed with Alu end parts into window frame. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass. Shade name: SOLTEC Shutter V Drive: Manual - windlass Cartridge: No Guides: Inox braided cable 0 3 mm Assembling: Onto the window Dimensions: Maximum width is 350 cm, height depends in this case on maximum surface of...

Shade name Shutter V - Inox braided cable Manual - windlass Technical catalogue / Shutters / V si_soltec_techcat09_rolov.indd 9

Shutters Shutter V Design description External screen shutter type V with Zn plated steel roller axle 060 .Weight profile 026 mm is equipped with weight. Inox braided cable O 5 mm with Inox bracket. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is outside, color can be selected. Driven by windlass. Possibility of windlass take down. Shade name: Shutter V Drive: Manual - windlass Cartridge: No Guides: Inox braided cable 0 5 mm Assembling: Into the ceiling, removed from the window or facade line Dimensions: Maximum width is 350 cm, height depends...

Inox braided cable Shade name Shutter V - Inox braided cable Manual - windlass Technical catalogue / Shutters / V si_soltec_techcat09_rolov.indd 11

Shutters Shutter V Design description Interior screen shutter type V with Alu roller axle 050 mm or Zn plated steel axle 070 mm.Weight profile 020 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by motor. Shade name: Shutter V Cartridge: No Guides: No Assembling: Above the window or into the ceiling, in the ceiling kineta or behind the mask Dimensions: Maximum width is 500 cm, height depends in this case on maximum surface of linen being 16 m2.

Shade name Shade name Technical catalogue / Shutters / V si_soltec_techcat09_rolov.indd 13

Shutters Shutter V Design description Interior screen shutter type V with Zn plated steel roller axle 043 mm.Weight profile 020 mm is equipped with weight. Steel sides of dimensions 100/110 mm are powder painted in RAL. The linen is inside from the ST, SA, S group, color can be selected. Driven by windlass. Possibility of windlass take down. Shade name: Shutter V Drive: Manual - windlass Cartridge: No Guides: No Assembling: Above the window or into the ceiling, in the ceiling kineta or behind the mask Dimensions: Maximum width is 350 cm, height depends in this case on...

Shade name Manual - removable windlass Technical catalogue / Shutters / V si_soltec_techcat09_rolov.indd 15

Balance of light and shade. Soltec - Sun Protection Systems, MIPO d.o.o., Obrtna ulica 9, 8257 Dobova, Slovenia t +386 (0)7 45 22 126, f +386 (0)7 45 22 128, e info@soltec.si, www.soltec.si