solbond
8Pages

SOLON SOLbond. SOLON SOLbond · EN

SOLON SOLbond – the efficient solar power system for metal roofs. No traditional substructure or aluminum frame is needed for assembly. Thanks to a weight of just 8.5 kg / m2, the system can even be installed on roofs with a low load restriction. And the best part: the crystalline laminate ensures that SOLON SOLbond achieves considerably more than twice the performance of standard thin film systems. The Easiest Way to Achieve High Yields. SOLON SOLbond at a Glance: Minimum static rooftop load – just 8.5 kg / m2 Setup without roof penetration Fast, easy installation through adhesive sealing...

Roof parallel setup. Optimum roof area utilization No shading caused by mounting systems Fast, easy installation through adhesive sealing Minimum suction wind or wind loading Roof area adhesion. No drilling = no damage to the roof No substructure normally required Adhesive reacts to wind loads with flexibility No corrosion with other materials Long-lasting system stability. TÜV-certified system 20-year guarantee for adhesive Free adhesion tests System approved pursuant to DIN 1055 / EN 1991-T1-T6. No static calculations required Approved for all snow- and wind-load zones Easy handling SOLON...

SOLON SOLbond Output Performance classes between 265 and 285 Wp Efficiency Up to 14.6 % Dimensions 1,973 x 993 x 4.5 mm Features – 72 mono- or polycrystalline 6” cells – Junction box with 3 bypass diodes – Frameless – Surface load of only 8.5 kg/m2 – 3.2 mm ultra-transparent glass – Tedlar multi-layer film, white – Invisible interconnectors – Prefabricated with plug, MC4-combinable plug Approvals and certificates TÜV: IEC 61215 Edition II, IEC 61730 (incl. Safety Class II) Sikasil® SG-20 Container size 300 ml / 600 ml Chemical basis 1-component silicone, moisture-hardening Cross-linking...

1. Roof cleaning. Sika Cleaner-205 removes dirt and optimizes adhesion 2. Applying adhesive beads. The height and width of the beads are determined by the spacers and the nozzle. 3. Placing the modules onto the marked area. Simply apply light pressure – that is it! The modules can now be interconnected. Three Small Steps for Setup, One Giant Leap for Lasting Returns. 6

Three prerequisites must be met prior to setting up a SOLON SOLbond system: Training course. Every installer receives comprehensive product training, including hands-on experience adhering a sample piece. Roof age. We calculate an operating life of about 25 years for SOLON solar plants. Prior to every installation, an inspection is performed to establish whether the roof will hold for that period of time or whether system setup could be simultaneously combined with roof renovation work. In general, the roof should not be more than five years old. Older roofs will be tested individually....

SOLON SE Am Studio 16 12489 Berlin · Germany Phone +49 30 81879-0 Fax +49 30 81879-9999 E-Mail components@solon.com 02/11