MAXIFLO Multifuel The Stainless Steel Thermal Storage unit providing mains pressure hot water & space heating assist from renewable energy sources to an open vented heating circuit. The MAXIFLO Multifuel stainless steel thermal storage unit will allow multiple renewable energy sources such as solar thermal & solid fuel burning appliances to be connected. Open vented connections enable a boiler to be connected, or through a primary coil a sealed system boiler may also be connected. Fresh legionella free hot water is delivered at up to 35 litres per minute through a highly efficient plate heat exchanger which is controlled through an intelligent electronic temperature management system. Features & Benefits of the MAXIFLO Multifuel • Manufactured in the UK • Market leading low standing heat loss • Inputs from uncontrolled heat sources • Mains pressure hot water • No legionella risk • Anti-scald protection through intelligent control • No requirement for discharge pipe work under G3 • Multiple renewable energy input options • Oversized solar thermal coil for maximum heat transfer • Dedicated solar volume allows collector field suitability • Smart attractive white cased unit

Appliance 1. Open vent - 22mm 2. Solid fuel overheat stat 3. Domestic hot water store sensor 4. Plate heat exchanger flow - 22mm 6. Solid fuel flow - 28mm comp 8. OV boiler flow - 28mm comp 10. Central heating flow - 22mm comp 11. Primary coil flow - 22mm comp (400 model - 28mm comp) 12. Store control stat Component kit supplied attached • Thermostat • Immersion heater 13. Primary coil return - 22mm comp (400 model - 28mm comp) 14. Central heating return - 22mm comp 15. OV boiler return - 28mm comp 17. Solid fuel return - 28 mm comp 18. Plate heat exchanger return - 22mm 19. Solar coil flow -...