THERMOSIPHON SYSTEM FINO 150-1-T250 & FINO 200-1-T270
THERMOSIPHON SYSTEM FINO 150-1-T250 & FINO 200-1-T270
- Both models have one collector each.
- Collector area: 2.31m² for FINO 150-1-T250 and 2.68m² for FINO 200-1-T270.
- Absorber surface: 2.10m² for FINO 150-1-T250 and 2.42m² for FINO 200-1-T270.
- Weight: 50kg for FINO 150-1-T250 and 57kg for FINO 200-1-T270.
- Absorber fins are made from aluminum or copper with selective treatment, welded to copper pipe using laser or ultrasonic welding with an absorption rate of 95% and emission rate of 5% ±1.
- Casing is made from aluminum profile, epoxy powder oven painted, and resistant to sea water.
- Glassing is made from tempered low iron glass with 88.5% transmission.
- Sealing is done with EPDM rubber.
- Nominal capacity: 150 liters for FINO 150-1-T250 and 200 liters for FINO 200-1-T270.
- Dimensions: 1320mm x Ø500 for FINO 150-1-T250 and 1320mm x Ø530 for FINO 200-1-T270.
- Weight empty: 60kg for FINO 150-1-T250 and 67kg for FINO 200-1-T270.
- Weight filled: 202.7kg for FINO 150-1-T250 and 245.7kg for FINO 200-1-T270.
- Boiler body is made from 2.5mm USD 37.2 steel plate, enameled with a double direct method fired at 860°C.
- Heat exchanger is an internal double jacket made from 1.5mm USD 37.2 steel sheet.
- Insulation is polyurethane, 50mm (40kg/m3) for EUR 150 and 40mm for EUR 200.
- External cover is silver color, with an optional stainless steel cover.
- Anode protection is provided by a magnesium rod.
- Solar safety valve is rated at 2.5at.
- Maximum working pressure is 10 at.
- Electric element ranges from 2-4kW.
Catalog excerpts
THERMOSIPHON SYSTEM FINO 150-1-T250 & FINO 200-1-T270 Technical Specifications 150-1-T250 Collector Number of collectors Absorber Surface Weight Absorber Fins Aluminum or Copper sheet with selective treatment. Welded to copper pipe with laser or ultrasonic welding. a = 95% e = 5% ±1 Aluminum profile epoxy powder oven painted. Free of screws and rivets. Sea Water resistant. Tempered low iron glass 4 mm. 88.5% transmission. EPDM Rubber Tank Nominal Capacity Weight empty Weight filled Boiler body The boiler “body” is made from 2.5mm USD 37.2 steel plate. The boiler is (glass) enameled with the advanced double “direct” method “fired” at 860° C Heat exchanger Internal “double jacket” heat exchanger made from 1.5 mm U.S.D. 37.2 steel sheet Polyurethane 50mm (40kg/m3) cast under pressure for EUR 150 and 40mm for EUR 200 External Cover Silver color (Stainless steel cover is optional) Anode protection Solar Safety Valve SOLE S.A. –LEFKTRON & LAIKON AGONON, 136 71 ACHARNAI-ATHENS-GR TEL: (+30210) 2389500 ● FAX : (+30210) 2389502 e-mail: [email protected]
Open the catalog to page 1All Sole catalogs and technical brochures
Eurostar ECO2 Pages
AIIRSOL4 Pages
FORCED CIRCULATION KITS2 Pages
Alpha Compact1 Page
ECO COLLECTOR1 Page
AIRSOL AIR COLLECTOR1 Page
Climasol Solar Air Conditioning12 Pages
sunstar2 Pages
Archived catalogs
AIRSOL4 Pages
- Industrial solar panel
- Industrial water heater
- Thermal solar collector
- Flat thermal solar collector
- Water heating thermal solar collector
- Thermal solar collector with frame
- Heating thermal solar collector
- Solar water heater
- Roof thermal solar collector
- Horizontal water heater
- Commercial water heater
- Solar kit
- Compact water heater
- Vertical thermal solar collector
- Thermal solar kit
- Black thermal solar collector
- Roof solar kit
- Thermosiphon water heater
- Water heater with boiler connection
- Selective thermal solar collector