Catalogs >
SOLARWORLD >
Sunfix aero 2.0

Sunfix aero 2.0
2Pages

Catalog excerpts

Low-ballast flat roof system: The Sunfix aero 2.0 offers all of the advantages of an aerodynamic flat roof system. It can be installed without penetrating the roof and with little stress on roofs with low load-bearing reserves. Installation made easy: The optimized Sunfix aero 2.0 now only has 5 components and a simple product design which guarantees quick and easy installation. The mechanical end stops on the system supports locate the solar modules directly into the right position thus guaranteeing the module are correctly installed. Low-cost storage and transport. The Sunfix aero 2.0 does not require 6 m long profiles. The system components, made of aluminum, are light, stackable and easy to handle which reduces the storage space required to a minimum and drastically reduces the transport costs. Flexible deployment: The minimum size of the system is 2 x 3 or 3 x 2 modules. For heavy snow regions, there is a heavy load version that can be used from 2.4 kN/m².

Open the catalog to page 1

Technical Details Components consist of aluminum and stainless steel Suitable for use on flat roofs with an inclination of up to 5° Aluminum-laminated building protection mats included in the system System weight approx. 2 kg/m² (Standard version plus modules and ballast) Static friction frame/ground µ = 0,50 required Suitable for SolarWorld module (1675 x 1001 x 31 mm) Usable for building heights up to 25 m. Cable clips for fastening cables included in the system The existing flat roof insulation must permit a minimum surface pressure of 60 kN/m² CE marked product Fixed row spacing 1.795 m...

Open the catalog to page 2