BALL STOP NETS & FENCES

Sodex Sport Factory OUR OFFER We are pleased to launch this new catalogue to demonstrate our development in sports fencing. On these pages, you can find the latest version of our "FIX +" attaching bracket for connecting welded-wire fences to posts and handrails. Based on the success of the previous version, we wanted to continue its development to improve some details that, we hope, will make a difference for your customer! Indeed, we developed a molded piece that allows for greater aesthetics and avoids sharp edges, while also facilitating screw installation, and not present protrusions towards...

Ball stop posts Ball stop nets Ball stop fences Tennis court fencing Windbreaks / Windscreens Handrail fences

BALL STOP POSTS BALL STOP POSTS General characteristics of ball stop netting – round posts - Material :Galvanized steel - Finish: green powder-coated RAL 6005 as standard Other colors on request Over 35 years of expertize allow us to recommend tube diameters and thicknesses that are perfectly suited for traditional ball-stop posts. If no additional specifications are provided, our standard specifications will be applied. Some projects may require a detailed technicals study. Depending on the location of your project's installation, you need to account for wind impact on the structure using the...

BALL STOP POSTS The dimensions of our posts At Sodex Sport, we determine the dimensions of our support posts following the guidelines outlined in the EN 1990 standard, specifically in section 7.9. This standard provides the necessary information to calculate how wind affects our posts. By considering these factors, we ensure accurate dimensions that account for the varying pressures exerted on the structure. First, we need to calculate the dynamic pressure Q (Pa) : Vb (m/s) : Reference wind speed indicated in the National Annex (c) Cr : Coefficient of roughness of the ground Iv : Turbulence Intensity...

BALL STOP POSTS Tension posts Starting post Retention post Corner post Our starting, corner and retention posts are equipped with a PVC cap (fig.1) and pulleys (fig.2) for the passage of the cable. Each pulley is equipped with a hook (fig.2) which allows to fasten the corner of the net. Depending on the height, our posts are equipped with welded brackets for braces (fig.3) for reinforcement. One or more cable guides are welded along the post (vertical cable support) (fig.4). In the lower part, a plate is welded to receive 2 tensioners (fig.5). In case of an intermediate cable, another bracket...

Wind braces are essential for tall structures, small mesh nets, particularly in windy conditions. 1 to 2 spacers are used to reinforce these braces. Braces are used to strengthen the starting, corner, and tensioning posts. They are oriented in the same direction as the tension cable. Depending on the height of the ball stop net and the style of net, they can be equipped with one to three spacers. In situations where braces cannot be installed, such as near a door or gate, spacer bars are utilized to reinforce posts, including angle, starting, and retaining posts. Upon request, we can manufacture...

-• Existing post solutions Sodex Sport offers a diverse range of accessories: - To install on existing posts. - When the angle on a corner post is undetermined. This table provides a non-exhaustive list of adaptor clamps we can provide. Each clamp can be manufactured in a variety of sizes.

GATES Our gates are made of green powder-coated galvanized steel with welded mesh gate or welded bar gates. Their standard height is 2.00m. We offer various widths of gates, from single-leaf to double-leaf configurations. Gates feature : - An industrial-type lock with a powder-coated aluminium case and a stainless steel mechanism. - Hot-dip galvanized 180° hinges offering a 4-dimensional adjustment. - A powder-coated galvanized steel support post. Different colors and treatments (hot-dip galvanized) are available.

BALL STOP FENCESBALL STOP FENCES -• Twisted mesh fencing Tensioning posts (starting, corner, and retention) are equiped with wire welded guides every 50cm to fasten the tensioners. Height above ground (Diameter) - Twisted wire mesh The rolls of twisted wire mesh are 25 meters long. They are made of green powder-coated galvanized twisted wire. The mesh size of the fence is 50x50mm. * Possibility to order 12.50m rolls made from 3.90/4.40mm wire. All our welded wire mesh is supplied with tension wires, framing bars, stiffeners and staples.

-• Welded mesh fencing panels- Posts REF. + 2 types of clamp: A single-sided model for the starting or corner posts and a double-sided model for the intermediate retention posts. + 2 lengths of clamp: A short model that will take one wire, a long model that will take 2 welded wire mesh wires (fig.1) or compensate for a post offset (fig.2). Several clamp diameters are available to be fixed on the posts receiving the net. We recommend that you use 4 clamps per post for optimal stability.

BALL STOP FENCES FIX + fastener The FIX + fastener is composed of a rubber buffer (fig.1), a PVC flange (fig.2) and a stainless steel anti-vandal screw (fig.3) The posts have 5 fasteners for 2m-high welded wire mesh fences. This part is attached to the post with inserts pre-installed by our teams in the workshop. This fastener allows the fences to be fixed in front of the posts. The rubber buffer is shock-absorbing. It allows noise reduction during ball impacts The PVC flange is fixed with a vandal-proof stainless steel screw A sufficient distance maintain the welded wire mesh and the post thanks...

BALL STOP NETSBALL STOP NETS -• Ball stop nets All our nets are made of high density polyethylene, processed with UV treatment. Perimeter netting enables protecting elements outside the playing field as well as preventing ball loss thus reducing game interruptions. S77710V - Tensioning cable. S77730V - Plastic net hook Customizable configuration: Size, 0 thread, mesh, colours (white, black and dark green).