Evaco®
2Pages

Technical file Evaco® - composite roof gutters General product description: The roof gutters consist of glass fibre reinforced polyester resins with special additives. The inside of the gutter is protected by a PET film and the outside of the gutter is protected by a UV resistant PET film. This provides the chemical resistance, a surface smooth and very little maintenance. The gutter is fixed on the Duplex coated or hot galvanised brackets. The gutters are assembled to each other with the connector pieces. Angles are executed with prefabricated angle pieces. The PVC end pieces are equipped with a sealing. Specific characteristics gutter: Chemical characteristics Impact resistance Dilatation coefficient Dimensions Operating temperature Resistant against most acids and bases. Extreme high impact resistance, also at low temperatures 8.10 ³ mm/m°K 4m, 5 m, 6m, 8m, 9m, or custom made as from 500m -40 à + 130 °C Specific characteristics brackets: Chemical characteristics Resistance UV Layer thickness Duplex-coating resists diluted acids and bases, salts (except Peroxids and solvents) Resistant to U.V. Hot galvanised 100µ (according to EN ISO 1461) Duplex-coating : hot galvanised 30-100 µm + coating 300 – 700 µm pregalvanised per electrolysis 12 µm of laquered (Quickfix brackets)

List of possible combinations : Square model Type composite gutter end piece L/R connector inner corner outer corner bracket H bracket 47° bracket V bracket V bracket refurbishment bracket quickfix universal clip for tiles corrugated sheet clip