ANCHORING SYSTEM FOR VENTILATED FACADES

TECHNICAL SPECIFICATIONS • GR-CLM Stainless steel alloy AEX-120/250 A2 standard [A4 to order] DESCRIPTION • GR-CLM Installation making a Ventilated Facade. Simple and safe installation. 2 models - intermediate and terminal - for fastening the claddings as from 30mm thick. 4 different dimensions, up to a maximum outlet of 155 mm (special measurements upon request). ■ Minimum thickness of the cladding of 30 mm. ■ Minimum recommended joint: 6 mm in main joint, 3 mm in secondary joint ■ Machined claddings with an 8 mm diameter drill. ■ Calculation carried out with densities of 3000 kg/mi. SELF-SUPPORTING...

TECHNICAL SPECIFICATIONS • GR-ESP Stainless steel alloy AEX-120/250 A2 standard [A4 to order] DESCRIPTION • GR-ESP Specific for small cavity facades. Installation making a Ventilated fagade. Simple and safe installation. 2 models - intermediate and terminal - for the fastening of Wide range of measurements and lengths. ■ Minimum thickness of the cladding of 30 mm. ■ Minimum recommended joint: 6 mm in main joint, 3 mm in secondary joint. ■ Machined claddings with an 8 mm diameter drill. ■ Calculation carried out with densities of 3000 kg/m3. SELF-SUPPORTING ANCHORING )IMENSIONS OF THE GR-ESP ANCHORINC...

TECHNICAL SPECIFICATIONS • GR-ESP-PI Stainless steel alloy AEX-120/250 A2 standard [A4 to order] Specific for slate and materials where the machining is not Installation making a Ventilated fagade. Simple and safe installation. 2 models - intermediate and terminal - for the fastening Wide range of measurements and lengths. ■ Minimum thickness of the cladding of 10 mm. ■ Minimum recommended joint: 6 mm in main joint and free ■ Calculation carried out with densities of3000 kg/m3. SELF-SUPPORTING ANCHORING DIMENSIONS OF THE GR-ESP-PI ANCHORING INSTALLATION DIAGRAMME The weight of the cladding is...

Calle Praga, Edificio 3 Nave 6. Poll go no Industrial Cova Solera