ARL
1 / 3Pages

Injected Anchors with sleeve Concept Stainless steel pipe reinforcement , the section of which is square 30/30/3 , equipped with head plates 3 to 5 mm thick ; the anchor can be made of elements to be connected with screws or with flanges ; Fabric sleeve wraps the whole anchor ; No injection pipe , injection through the ; reinforcement pipe Applications This type of anchor is the ideal solution to the following problems : - Structural mass reinforcement Stabilization of disorders Strengthening of unstable constructions Thermal or seismic reinforcement Binding of a new construction with an existing one - Strengthening of a construction in view of an addition - Creation of a beam or of a reinforcement in an existing structure where an opening is made - General binding and fixing of a group of constructions The ARL is particularly used to reinforce new or existing constructions which experience a structural disorder: rupture , cracks , stabilization or reinforcement before transformation . Steel Anchors

Reinforcement of existing slab Type d’application: 1) renforcement structurel de masse 2) stabilisation de désordres 3) reprise de massif en risque au niveau stabilité 4) sécurisation thermique ou sismique 6) frettage de construction en vue d’un relevage This anchor has no length limit and has ben used in applications requiring lengths up to 20 m since it can be made of connecting pour réaliser une ouverture elements . 8) solidarisation générale pour figer en place toutes It is often used together with the PCCH to spread the existing construction constructions loads on the new pile heads...

É LÉMENTS CONSTITUTIFS Installation Installation of this anchor is standard ; only provisions shall be made for the d’un acier inox de section carré L’ancrage est constitué space needed to install long ARL. 30 / 30 / 3 terminé par des plaques de 3 ou 5 mm d’épaisseur. En cas de faute de recul ou de grandes longueurs, l’ancrage peut être prévu avec un élément d’aboutage: type bride ou vissable. En fo du ainsi une augmentation de l’interface: Ancrage / Forage. D’autres formes d’associations sont possibles sur dessin et étude particulière. Constitutive Elements vivants en cas de exemple le...