APL
2Pages

(Pluralbar 3 or 5) Stainless Steel 6/8/10 Concept Reinforcement made of 3 to 5 high tensile or stainless steel re-bars , diameters of the bars 5 to 10 mm ; non limited length as far as overlap of bars is as required in reinforced concrete ; an other connecting system consists in screwing head plates one to another ( bars being welded to them ) ; anchor can also be post-tensioned with properly equipped head plates (dowel screw) Fabric sleeve wraps the whole anchor ; Single injection pipe per 6m long element ; Applications This type of anchor allows the building of reinforced beams , post tensioned or not in existing constructions The flexibility of the APL is a great advantage at installation : - installation in walls where room for backward movement is not possible, - possible hooping in open slots or joints, - containment of the grout in case of cracks , Steel Anchors

Investigations L’ancrage est to determine the loads , the de An engineer should be hired composé principalementway 3 à 5 barres en acier and stresses will be spread in the layout of the anchors. de verre dans des diamètres de 5 à 10 mm. Pour les composites, the quality of the existing The investigation shall concentrate onl’ancrage se compose de 5 à 8 barres. structure and its capacity to carry the loads , by testing samples . L’ANCRAGE APL PERMET DE REALISER DES POUTRES First steps may consist PRECONTRAINTES OU NON DANS DES ARMEES in stabilizing and strengthening the structure...