ADC
3Pages

(Double Chambre WW) Stainless Steel 22 Concept Reinforcement made of HR or stainless steel pipe the diameter of which is 27 mm and the thickness of which ranges from 3 to 5 mm; (Fig.1). The anchor can be provided on one side with a pin or threaded casing (Fig. 2) . If needed the anchor can be bowed (Boomerang) .(Fig.3) Fabric sleeve wraps the whole anchor ; Injection pipe the diameter of which ranges from 8 to 10 mm is located in center of anchor and removable after injection ; its length is to be determined for accessibility through the nearest point ; An injectable fix for spacing can also be used as a complement .(Fig.1) Steel Anchors

This type of anchor allows to hang prefabricated concrete or natural stone elements on concrete or masonry shear walls in all directions . Each anchor can bear up to 5 tons depending on the kind of steel used , the diameter of the anchor and the injected length in the support and the hanged element . The standard anchor can be provided with two injection chambers with non equal lengthes . The anchor can be installed on site or at the time of prefabrication , a reservation being foreseen in the bearing element. The anchor can be injected in all directions , in the space between the element...

Installation DRILLING 2 types réservations 2 types deof resevations : : A) Réservationsduring prefabrication of elementsdes éléments A) Casing left réalisées dans la fabrication à sceller en plaçant au blocks installed during to be hanges and puley moment de la construction des moufles dans les voiles supports . construction of the bearing wall (fig.1) . (fig.1) B) Par forage au moyen d’outils perforants ou diamantés B)By drilling with performing diamond tools . (fig.2) . (fig.2) Dans le cas de refroévoir toutes les In case of water cooling all necessary precautions prestations...