Glass solutions for fagades

Coated glass is produced using two different methods: off-line and on-line. Daylight Transmittance (%) Off-line coated glass, including low-E (Şişecam Climax), temperable low-E The percentage of visible light (Şişecam Climax T), solar low-E (Şişecam Climax Select, Şişecam Ecosol, transmitted through the glass. Şişecam Duosol), temperable solar low-E (Şişecam Ecosol T, Şişecam Duosol T, Şişecam Prosol T) is produced by depositing multi-layered metals/ Daylight reflectance outdoor (%) metal oxides onto float or tinted glass through “magnetically enhanced Daylight Reflectance Outdoor vacuum sputtering”...

• Project function • Sunshade elements on the façade • Project location • Glass dimensions and thicknesses • Mechanical performances • Wind / snow loads • Visual impact The above criteria should be taken into consideration when choosing the right glass. The choice of glass for the façade is driven by functional needs such as heat control or both heat and solar control, depending on the climate zone, to ensure effective energy savings. In addition to these functional needs, factors such as safety, security, noise control, daylight transmittance, glare, and reflection control, as well as the desired...

Glass consultancy for projects §i§ecam Glass Consultancy is here with right glass solutions for your project! Our experienced team provides Glass Consultancy for your projects and develops solution for your project requirements. In the scope of Glass Consultancy: • We make static, thermal breakage risk, and performance calculations for the projects. • We provide glass specification draft based on the calculations. • We offer the right Glass Consultancy for the project’s requirements. • We supply samples and mock-up support for projects. • We share our know-how about glass through trainings. >...

MATILD PALACE §i§ecam Duosol T 58 §i§ecam Climax T 71 $ipecam offers environmentally sensitive and innovative solutions as part of its CareforNext sustainability strategy. Following the “product life cycle analysis (LCA)” carried out for allproducts in the flat glass product portfolio, “Environmental Product Declarations (EPD)” certificates have been obtained for 11 product groups.

(1)Applied on §ipecam Extra Clear substrate. Temperable Low-E Glass (Heat control & safety)(3) 4+16+4 mm, coating on surface #3 (2) Available both tempered and annelead options with the same color and performance. (3) Must be used as tempered to reach its final performances, can not be used as annealed.

(3)Must be used as tempered to reach its final performances, can not be used as annealed. Solar Low-E Glass (Heat and solar control) (1) Applied on §ipecam Extra Clear substrate. (2) Available both tempered and annelead options with the same color and performance.

(1) Applied on §ipecam Extra Clear substrate. (2) Available both tempered and annelead options with the same color and performance. (3) Must be used as tempered to reach its final performances, can not be used as annealed.

Reflective Glass (Solar control] (4) Prevents solar heat transmission into buildings, control the luminosity of sunlight and used in commercial buildings such as hospitals, offices, and shopping malls. Thanks to its reflectivity, it offers a uniform appearance for buildings with curtain walls by covering background features. Recommended to be used as toughened or heat strengthened to avoid thermal breakage risks. (5) Due to coating, colour of the sub strate glass appears more clearly. §ipecam Tentesol Bronze

Glass Projects Mobile Application §i§ecam GlassTool Mobile Application Google Play Glass Solutions for Facades Catalogue is for informational purposes only and the information contained there in is subject to change by §i§ecam without any warning. Differences may occur between the given values and the actual values depending on the conditions at the place of use. §i§ecam cannot be held responsible in any way for these differences. (Published in 2025)