Catalog excerpts
ŞİŞECAM LACQUERED GLASS MANUAL FOR APPLICATIONS AND PROCESSES
Open the catalog to page 1INDEX 1. Introduction 2. Product Definition 3. Packaging 4. Storage 5. Cutting 6. Shaping 7. Washing 8. Application 9. Final product packaging 10. Isıcam and Double Glasses 11. Lamination-Tempering
Open the catalog to page 21. Introduction Purpose of this manual is providing information to final users about accurate methods of storing, cutting, processing, shaping, and other applications of Şişecam Lacquered Glasses. 2. Product Definition Şişecam Lacquered Glass is a decorative glass manufactured by applying high quality paint on float glass. Paint used in applications is an environment friendly product as it does not contain any heavy metals or chemicals disastrous for environment. Şişecam Lacquered Glass is a decorative glass utilized for only interior design which offers aesthetic solutions. It can be used...
Open the catalog to page 3After cutting glasses, they should be stacked where the painted surfaces will not be in contact with tables. Otherwise, there may be a risk of damage for the painted surfaces. 6. Shaping Şişecam Lacquered Glass can be cut in any preferred form. Shaping quality depends on clean cutting. Chamfering, grinding, beveling and drilling can be done. (Under the same conditions with mirrors) Sandblasting and acid etching should be applied on the unpainted surfaces of glasses. Care should be taken for avoiding the contact between the materials used during these processes and the painted surfaces of...
Open the catalog to page 410. Isıcam and Double Glasses It is not recommended to use Şişecam Lacquered Glass in double glasses or ISICAM combinations which is a trademark of Şişecam Flat Glass, even when the painted surface is positioned on the inner side. 11. Lamination-Tempering Şişecam Lacquered Glass cannot be tempered. Şişecam Lacquered Glass cannot be laminated as it does not stick to the PVB layer. If attempted, it will not be classified as laminated glass due to the low level of adhesion. Where safety is a requirement, safety films should be used. Safety films should be applied on the painted surfa
Open the catalog to page 5All Şişecam catalogs and technical brochures
-
Solar Glass
2 Pages
-
Reflective Thermal Risk
2 Pages
-
Coated Glass
13 Pages
-
Şişecam Tentesol Titanium
13 Pages
-
Şişecam Tentesol
13 Pages
-
Şişecam Temperable Low-E Glass
13 Pages
-
Reference Projects 2021
107 Pages
-
FLOTAL
2 Pages
-
Şişecam Low-E Glass
24 Pages
-
Şişecam Wired Glass
2 Pages
-
Şişecam Tinted Float Glass
4 Pages
-
Şişecam Picture Frame Glass
2 Pages
-
Şişecam Patterned Glass
2 Pages
-
Şişecam Laminated Glass
2 Pages
-
Şişecam Lacquered Glass
2 Pages