Catalogs >
Siplast >
Teranap® TP

Teranap® TP
4Pages

Catalog excerpts

A Excellent resistance to ageing due to the elastomeric bitumen compound enabling the material to retain its elasticity for extensive periods A High resistance to puncturing allows Teranap TP to be laid on a substrate which is not specially prepared A Double protection by polyester film surfacing and a thick polyester fabric reinforcement A Easy anchoring and joining to concrete structures A Reliability and simplicity in application: - once unrolled, the overlaps can be immediately sealed by propane torch. This simple welding method is less dependent on weather conditions and less sensitive to dirt - less stress due to temperature, humidity or dust during application A Repairs of accidental leaks can be carried out under water using a specially prepared resin. No need to remove the water Main uses ■ Tanking and underground installations. ■ Hydraulic engineering: waterproofing of tanks, reservoirs, waste water storage ponds, canals, dams. ■ Waterproofing of “cut-and-cover” tunnels, pre-cast ducts. ■ Waterproofing of environmental protection installations. Description Teranap TP is a geomembrane manufactured from SBS elastomeric bitumen reinforced with a non-woven polyester geotextile. ■ The underside, covered with a polyester film, is highly resistant to root penetration. ■ The surface is coated with silica sand.

Open the catalog to page 1

* Asqual certified products. polyester Anti-piercingreinforcement polyester film Complementary information ■ Installation manual for Teranap TP. ■ References (job list). Customs nomenclature ■ 68.07.10.19.0.00.0.P Safety Teranap TP is not rated dangerous (for the applications described in this document). It is possible to strengthen one or several characteristics of Teranap TP, by bonding an anti-puncturing or a drainage geotextile, UV-stabilised if requested. ■ Teranap GTX is a Teranap TP geomembrane with a factory-bonded geotextile. ■ The close bonding of the membrane to an...

Open the catalog to page 2

Compatibility Very Good Very Good Very Good Very Good Very Good Very Good Very Good Typical characteristics resulting from tests made in the Siplast Laboratories on materials taken from stock.

Open the catalog to page 3

Scope of application Water retention installations ■ Irrigation works: earth canals, concrete canals, aqueducts, reservoirs. ■ Dams, embankments. ■ Drinking water reservoirs. ■ Fire-fighting water tanks, sprinkler basins. ■ Storm water regulation ponds. ■ Leisure lakes, ponds for golf courses. ■ Fish breeding ponds. Waste water storage, landfill sites ■ For settling, aeration, purification. ■ For industrial waste water and deposits. ■ For agricultural waste: sewage treatment. ■ Domestic waste landfill sites. Tanking and underground installations ■ Any tanking: foundation rafts, structures,...

Open the catalog to page 4