Steeldeck - Self-protected
8Pages

Steeldeck Self-protected waterproofing Main area and upstand descriptions Self-protected waterproofing systems for non-accessible roofs on steeldeck

Steeldeck Self-protected waterproofing Contents Selected system descriptions 3 Upstands 6 Siplast product descriptions 7 Attention : the information herein is a general guideline, but does not take into account restrictions or special instructions related to the bearing element, to certain insulations, to the geographical location, to the structural configuration, etc. This information does not relieve the professionals from obtaining full knowledge of the reference documents (prevailing Local Technical Standards, Technical Assessments, Installation Specifications, etc.) This entails...

Steeldeck Self-protected waterproofing 1.1 Steeldeck Non-accessible roof with granule surface finishing On flame sensitive insulation board Mechanically-fixed SBS elastomeric bitumen double-layer waterproofing system Parastyrene FM JS + Paradiene 30.1 GS Slope  3%   Upstands: Siplast Primer SBS bitumen primer.   Upstands: torched Parequerre reinforcement angle.   Vapour control layer (no VCL on regular steeldeck) Ceceal or Adevapo on perforated steeldeck.   Torched granule-surfaced Paradiene 30.1 GS cap sheet.   Insulation: expanded polystyrene boards, polyisocyanurate boards with fibre...

Steeldeck Self-protected waterproofing 1.2 Steeldeck Non-accessible roof with granule surface finishing On insulation board Mechanically-fixed SBS elastomeric bitumen double-layer waterproofing system Paradiene FM + Paradiene 30.1 GS Slope  3%   Upstands: Siplast Primer SBS bitumen primer.   Upstands: torched Parequerre reinforcement angle.   Vapour control layer (no VCL on regular steeldeck, Ceceal or Adevapo on perforated steeldeck).   Torched granule-surfaced Paradiene 30.1 GS cap sheet.   Insulation: mineral wool board without bitumen coating, expanded perlite + fiber board, resol foam...

Steeldeck Self-protected waterproofing 1.3 Steeldeck Non-accessible roof with granule surface finishing On insulation board Mechanically-fixed SBS elastomeric bitumen single-layer waterproofing system Parafor Solo GFM or Paraflor Solo GFX JS on flame sensitive insulation board Slope  3% bis bis   Upstands: Siplast Primer SBS bitumen primer.   Vapour control layer (no VCL on regular steeldeck, Ceceal or Adevapo on perforated steeldeck).   Insulation: mineral wool board without bitumen coating, expanded perlite + fiber board, resol foam board, composite perlite + resol board, polyisocyanurate...

Steeldeck Self-protected waterproofing Upstands Technical specifications as described hereafter are suitable only for jobsites in plains climate Upstand flashings Their heights H shall enable the upstand flashings to extend upward to a minimal distance of 0.15m above the main area’s self-protected waterproofing (0.25m minimal distance in the special cases of eave valleys on inclined roof surfaces with 20 %). The kerbs are of steel sheet, either galvanized or with anti-corrosion treatment, the thickness (refer to the local technical standards) of which depends on: the height H of the kerbs;...

B4-60  |  12/08  |  Photos and illustrations Icopal  |  R.C.S. Nanterre B 552 100 984 System Brochure 1 – Edition 1 12, rue de la Renaissance F-92184 Antony Cedex Tél. +33 (0)1 40 96 35 00 Fax. +33 (0)1 40 96 35 07 www.siplast-international.com