JGN801 Steel Bonding&Jacketing Adhesive steel-concrete composite structure PRODUCT HIGHLIGHT 1. No crystallization during winter construction, and the curing time will not be prolonged (low temperature type). 2. Good operability, no stratification, no segregation, no precipitation, good thixotropy, no flow in construction, and can save the application amount of the adhesive. 3. Having varieties of products, and the construction technical problems under various harsh conditions (low temperature, high temperature, wet surface, underwater) can be solved. 4. The adhesive has high strength, high anti-aging ability, and excellent ability in terms of media resistance JGN803 Steel Jacketing Adhesive is a two-component modified epoxy structural adhesive. It is a special type of adhesive suitable for fixing and then potting the steel. It is mainly used for potting construction where highstrength bonding surfaces are required. The adhesive has three types: (acid, alkali and salt). 5. The adhesive has high bonding strength, high toughness and strong ability in terms of shock and impact resistance. 6. The material is environmentally friendly and does not contain volatile solvents, and it is safe and non-toxic. • normal temperature curing type, • low temperature (-10°C) curing type • humid environment (or water resistant) curing type. Steel Bonding&Jacketing Adhesive steel-concrete composite structure TECHNICAL DATA PACKAGE AND STORAGE This product is packed in plastic drum; component A: 9Kg/drum, B: 3Kg/drum; Shelf life: 12 months. HOW TO USE Clean the surface of the substrate:: Clean the surface of the substrate:Polish the bonding surface to remove the surface scum and loose layer, expose the new surface and blow off the dust with an air compressor, and then remove the dirt with acetone. Derusting the surface of the steel plate: : Derusting the surface of the steel plate:Carry out polishing with sandblasting, emery fabrics or wire brush, until the metallic luster appears. According to the weight ratio: : A:B=3:1, weigh the required amount and mix thoroughly. Recommended dosage: : 5~7Kg/ m². Sino-sina Building Materials Co.,Ltd. | www.wcrete.com | [email protected] | +86 15373872353